GB/T 16995-1997 《Determination of gelling time of thermosetting powder coatings at a given temperature》 Related products
The GB/T 16995-1997 standard specifies a method for measuring the gel time of thermosetting powder coatings at a given temperature (usually 180 ° C). Gel time refers to the time it takes for powder coatings to melt and become non-deformable, which is an important indicator of powder coatings properties and quality control. This method is not suitable for powder coatings with ultra-short gel time (less than 15 seconds). The standard describes the test principle, required materials, instrumentation and specific test procedures in detail, which is of guiding significance for quality control and Product Research & Development in the powder coatings industry.
This summary is not the original standard text and is for reference only. For accurate information, please obtain it through official channels.
| Status | Active |
|---|---|
| CCS | G50 | ICS | 87.040 |
| Release Date | 1997-09-26 00:00:00 | Implementation Date | 1998-04-01 00:00:00 |
Extended reading
- 1GB/T 16592-1996《Determination of mass loss when powder coatings are stoving (idt ISO 8130-7:1993)》
- 2QB/T 1950-1994《Determination of Salt Bath Resistance of Furniture Surface Paint Film》
- 3GB/T 4893.9-1992《Impact Determination of Furniture Surface Paint Film》
- 4GB/T 4893.8-1985《Determination of abrasion resistance of furniture surface paint film》
- 5GB/T 4074.20-1991《Enameled wire test method, film continuity test》
- 6GB/T 4074.15-1983《Enameled wire test method, reciprocating paint scraping test》
- 7GB/T 4074.14-1983《Enameled wire test method, one-way paint scraping test》
- 8GB/T 4074.10-1983《Enameled wire test method, film adhesion test----flat wire》
- 9QC/T 29117.3-1993《Motorcycle and light Motorcycle product mass inspection Vehicle Appearance mass evaluation method》
- 10QC 29008.7-1991《Automobile product mass inspection body paints painting evaluation method》