GB/T 3682.1-2018 《Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 1:Standard method》 Related products
The GB/T 3682.1-2018 standard specifies standard methods for determining the melt mass flow rate (MFR) and melt volume flow rate (MVR) of thermal plasticity plastics. MFR and MVR are key indicators for measuring the fluidity of plastics in the molten state. These tests provide important data for the processing performance of plastics. The standard describes in detail the test equipment, operation steps and calculation methods to ensure the accuracy and conformity of the test results. This standard applies to material performance evaluation in plastics production and quality control.
This summary is not the original standard text and is for reference only. For accurate information, please obtain it through official channels.
| Status | Active |
|---|---|
| CCS | G31 | ICS | 83.080.20 |
| Release Date | 2018-03-15 00:00:00 | Implementation Date | 2018-10-01 00:00:00 |
Extended reading
- 1GB/T 22378-2008《Pressure sensitive adhesives tapes of BOPP for general purpose》
- 2GB/T 28118-2011《Plastics and aluminum foil laminated films and pouches for food packaging》
- 3GB/T 30119-2013《Preparation method of calibration solution for atomic absorption measurement》
- 4GB/T 27503-2011《Test solutions of electrolytic conductivity analyzer - Preparation method of sodium chloride solutions》
- 5GB/T 27502-2011《Preparation method of reference solutions for the measurement of conductivity》
- 6GB/T 15171-1994《Test method for leaks in sealed flexible packages》
- 7GB/T 18396-2001《Natural latex - Determination of surface tension by the ring method》
- 8SN/T 0739-2003《Standard test method for viscosity determination of unfilled asphalt using the Brookfield thermosel apparatus》
- 9GB/T 11158-2008《Specifications for high temperature Test Chambers》
- 10GB/T 10588-2006《Specifications for mould growth testing chambers》