DIN 53508-2020 《Testing of rubber - Accelerated ageing》 Related products
The DIN 53508-2020 standard specifies two accelerated aging methods for vulcanized rubber: the air oven method and the oxygen pressure method. This standard is mainly used to evaluate the performance change of rubber under accelerated aging conditions to predict its durability in long-term use. The air oven method is suitable for simulating the aging of rubber in a conventional high temperature environment, while the oxygen pressure method is used to simulate the aging in a high oxygen environment. These methods are important for durability testing and quality control of rubber materials.
This summary is not the original standard text and is for reference only. For accurate information, please obtain it through official channels.
| Status | Active |
|---|---|
| CCS | ICS |
| Release Date | Implementation Date |
-
$ 12725.00 -
$ 12647.00 -
$ 5683.00 -
$ 11574.00 -
$ 13891.00 -
$ 15430.00 -
-
$ 10673.00 -
$ 10253.00
Extended reading
- 1DIN 50018-2013《Testing in a saturated atmosphere in the presence of sulfur dioxide》
- 2DIN 30670-2012《Polyethylen coatings of steel pipes and fttings - Requirements and testings》
- 3DIN 52031-0《Non -metallic materials exposure test of passenger compar tment components》
- 4CB 1171.5-1987《Method for determination of environment salt fog content and sedimentation rate of marine atmosphere, ship open-air parts and compartments by suction method and wet cloth method》
- 5BS 2782-5 552A-1999《Methods of testing plastics - Optical and colour properties, weathering - Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources》
- 6 0324《Salt fog corrosion tests are used to test the effectiveness of corrosion protection systems》
- 7 AA-0224《Salt fog Cyclic Corrosion Test Standard》
- 8 160-01-2003《Outdoor exposure testing in Florida and Arizona》
- 9ASTM G92-2020《Standard Practice for Characterization of Atmospheric Test Sites》
- 10ASTM G90-2017《Standard Practice for Performing Accelerated Outdoor Weathering of Materials Using Concentrated Natural Sunlight》