ISO 9117-3-2010 《Paints And Varnishes - Drying Tests - Part 3: Surface-Drying Test Using Ballotini》 Related products
This standard specifies a method for testing Coating surface drying using small Glass balls. This test is used to evaluate the surface drying properties of paints or varnishes that are dried by air action or chemical reaction. The testing process involves judging the drying state of the coating surface by contacting the coating surface with small Glass balls. This method can be used to determine whether the coating meets the specified drying standard, or to record the surface drying time by interval testing. This test is not applicable to stoving products. It is suitable for evaluating the surface drying of coatings over a specific period of time to ensure the suitability and effect of coatings in actual use.
This summary is not the original standard text and is for reference only. For accurate information, please obtain it through official channels.
| Status | Active |
|---|---|
| CCS | ICS |
| Release Date | Implementation Date |
Extended reading
- 1ISO 9117-1-2009《Paints And Varnishes - Drying Tests - Part 1: Determination Of Through-Dry State And Through-Dry Time》
- 2ISO 3549-1995《Zinc dust pigments for paints - Specifications and test methods》
- 3ISO 14713-2-2019《Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing》
- 4ISO 14713-1-2017《Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance》
- 5ISO 8130-2-2021《Coating Powders - Part 2: Determination Of Density By Gas Comparison Pycnometer (Referee Method)》
- 6ISO 11844-3-2020《Corrosion Of Metals And Alloys - Classification Of Low Corrosivity Of Indoor Atmospheres - Part 3: Measurement Of Environmental Parameters Affecting Indoor Corrosivity》
- 7ISO 11844-2-2020《Corrosion Of Metals And Alloys - Classification Of Low Corrosivity Of Indoor Atmospheres - Part 2: Determination Of Corrosion Attack In Indoor Atmospheres》
- 8ISO 11844-1-2020《Corrosion Of Metals And Alloys - Classification Of Low Corrosivity Of Indoor Atmospheres - Part 1: Determination And Estimation Of Indoor Corrosivity》
- 9ISO 22858-2020《Corrosion Of Metals And Alloys - Electrochemical Measurements - Test Method For Monitoring Atmospheric Corrosion》
- 10ISO 16276-2-2007《Corrosion Protection Of Steel Structures By Protective Paint Systems - Assessment Of, And Acceptance Criteria For, The Adhesion/Cohesion (Fracture Strength) Of A Coating - Part 2: Cross-Cut Testing And X-Cut Testing》