GB/T 8020-2015 《Determination of lead in gasoline—Atomic absorption spectrometry》 Related products
This standard specifies a specific method for the determination of lead content in gasoline by atomic absorption spectroscopy (AAS), suitable for the determination of total lead at mass concentrations in the range of 2.5 mg/L to 25 mg/L. The method is independent of gasoline composition and different types of alkyl lead compounds and can provide reliable detection results. The standard describes in detail sample preparation, reagent use, instrument requirements and operation steps, providing a technical basis for the detection of trace lead content in gasoline.
This summary is not the original standard text and is for reference only. For accurate information, please obtain it through official channels.
| Status | Active |
|---|---|
| CCS | E31 | ICS | 75.160.20 |
| Release Date | 2015-12-31 00:00:00 | Implementation Date | 2016-06-01 00:00:00 |
-
$ 1471.00 -
$ 2011.00 -
$ 1471.00 -
$ 1471.00 -
$ 1471.00 -
$ 1471.00 -
$ 1471.00 -
$ 1471.00 -
$ 1471.00 -
$ 1471.00
Extended reading
- 1GB/T 32179-2015《Chemical analysis of refractories—General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry(ICP-AES) methods》
- 2GB/T 14849.8-2015《Methods for chemical analysis of silicon metal—Part 8: Determination of copper content—Atomic absorption spectrometric method》
- 3GB/T 4372.3-2015《Methods for chemical analysis of zincoxide produced by direct process—Part 3：Determination of copper oxide content—Flame atomic absorption spectrometry method》
- 4GB/T 4372.4-2015《Methods for chemical analysis of zincoxide produced by direct process—Part 4：Determination of cadmium oxide content—Flame atomic absorption spectrometry method》
- 5GB/T 31576-2015《Animal and vegetable fats and oils—Determination of copper, iron and nickel contents—Graphite furnace atomic absorption method》
- 6GB/T 4372.2-2014《Methods for chemical analysis of zinc oxide produced by direct process―Part 2：Determination of lead oxide content―Flame atomic absorption spectrometry method》
- 7GB/T 4372.5-2014《Methods for chemical analysis of zinc oxide produced by direct process―Part 5：Determination of manganese content―Flame atomic absorption spectrometry method》
- 8GB/T 4372.7-2014《Methods for chemical analysis of zinc oxide produced by direct process―Part 7：Determinantion of ferric oxide content―Flame atomic absorption spectrometry method》
- 9GB/T 1819.8-2017《Methods for chemical analysis of tin concentrates—Part 8：Determination of zinc content—Flame atomic absorption spectrometric method》
- 10GB/T 4698.1-2017《Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 1：Determination of copper content—Flame atomic absorption spectrometry》