GB/T 5059.3-2014 《Ferromolybdenum―Determination of copper content―The flame atomic absorption spectrometric method》 Related products
This standard specifies a method for the determination of copper content in ferromolybdenum using flame atomic absorption spectroscopy (AAS), applicable in the range of 0.10% to 1.20%. After analysis of samples with sulfuric and nitric acid, soluble salts are dissolved with muriatic acid and the measurement of copper Absorbance at a wavelength of 324.7 nm. This method is suitable for the analysis of copper content in ferromolybdenum and provides an effective detection method for quality control.
This summary is not the original standard text and is for reference only. For accurate information, please obtain it through official channels.
| Status | Active |
|---|---|
| CCS | H11 | ICS | 77.100 |
| Release Date | 2014-03-27 00:00:00 | Implementation Date | 2015-01-01 00:00:00 |
-
$ 1450.00 -
$ 1982.00 -
$ 1450.00 -
$ 1450.00 -
$ 1450.00 -
$ 1450.00 -
$ 1450.00 -
$ 1450.00 -
$ 1450.00 -
$ 1450.00
Extended reading
- 1GB/T 30096-2013《Major letter symbols for laboratory instrument and equipment》
- 2GB/T 11446.5-2013《Test method for measuring trace metals in electronic grade water by atomic absorption spectrophotometry》
- 3GB/T 32705-2016《Safety requirements for laboratory instrument and equipment—Power supply for instrument and equipment》
- 4GB/T 3260.10-2013《Methods for chemical analysis of tin―Part 10：Determination of cadmium content―Flame atomic absorption spectrometric method》
- 5GB/T 32706-2016《Safety requirements for laboratory instruments and equipment—Noise measuring instruments》
- 6GB/T 3260.1-2013《Methods for chemical analysis of tin―Part 1：Determination of copper content―Flame atomic absorption spectrometric method》
- 7GB/T 32707-2016《Safety requirements for laboratory instruments and equipment—Oxygen bomb calorimeter》
- 8GB/T 3260.3-2013《Methods for chemical analysis of tin―Part 3：Determination of bismuth content KI photometric method and flame atomic absorption spectrometric method》
- 9GB/T 32709-2016《Safety requirements for laboratory instruments and equipment—Industry analysis instrument》
- 10GB/T 32708-2016《Safety requirements for laboratory instrument and equipment—Autoclave》