JFL

Scruf Travel 300mm, scruf speed 37cpm, counter 4, in line with GB/T9755-2014, GB/T9266, brush and brush holder total weight 450g, according to the national standard design

The measuring device has a groove depth of 0.1 to 4.0 mm and contains two sets of accurate scales. When used in conjunction with the sag tester, it can quickly analyze the levelling and sag behavior of coatings and significantly reduce the formulation adjustment time.

Knife tooth spacing 1, 1.5, 2, 3mm, cut mark length 35mm, 11 teeth, organic coating cross-cut adhesion measurement, plastic wood paint film thickness < 250mm, lame plating Eletroplating adhesion test

Outflow time 10~150s, flow hole diameter 4mm, capacity 100ml, cup width φ 49.5 + 0.2mm, Environmental temperature 0-50℃.

Adopt 45 ° one-time bending angle design, flatten Travel ≥ 10mm, adapt to 0.5-1 test plate, for T-type bending test coating flexibility, in line with the national standard

According to GB/T 11185-89, ISO6860-1984, cone shaft length 203mm, large end 38mm, small end 3.2mm, Operating temperature 23 +/- 2 ℃, relative humidity 50 +/- 5%, suitable for multi-layer systems.

Can simultaneously detect film thickness, adhesion, Hardness three kinds of film performance, destructive thickness measurement principle, multi-blade cutting knife adhesion, knife tooth spacing 1.0 and 2.0mm.

Pressure range 0~ 8T, piston diameter φ 70mm, working space 100 * 100 * 100mm, pressure Stability ≤ 0.5MPa/5min, digital display, piston reciprocating Travel can output pressure, up and down shaking pressure handle can be pressed

Impact height 0~ 100cm, Impact height 0~ 100cm, drop weight mass 1000g, punch diameter φ 8mm, Impact depth 2mm.

Display range 0.0-199 GU, Indication Error < 1.2GU, Stability 0.4GU, measurement window 1.5 × 2mm ellipse, in line with ASTM-C346 and other standards, first-class Glossiness Meter, for ceramic, plastic mirror Gloss

Model QHQ-A (500g), load 500g, standard GB/T 6739, with 13 Chinese pencils, three-point contact, refill 45-degree angle, mechanical push test.

Pressure range 0~ 60T, piston diameter φ 156mm, working space 220 * 150 * 280mm, Stability ≤ 0.5MPa/5min, digital display, up and down shaking pressure handle can be pressed, fast and labor-saving

Using 500g standard load, reading accuracy of 0.1mm, in line with GB/T9275-88 and ISO9518-76 international standards, weight only 1kg, compact and portable structure, stable and reliable test results.

Digital direct reading type, viscosity range 40.2KU~ 141.0KU, in line with GB standards.

Equipped with four different curvature radius scribing needles (R0.25/0.5/1.0/1 mm), uniform movement forms a gradual change Crowd, accurate measurement of drying time of each section of the film, to achieve the whole process evaluation

45 ° angle, load 500/750/1000g, speed 0.5-10 mm/s, Travel 100mm, film hardness testing, in line with GB/T6739