Solid content Tester
Solid content Tester is a device used to measure the content of solid components in materials. The instrument usually determines the percent solids in the sample by heating the sample to evaporate the volatile matter. Solid content Tester is widely used in food, chemical, pharmaceutical and other industries, providing important experimental data for product mass inspection and production control.
Solid content Tester Testing instrument
-
$ 649.00 -
$ 469.00 -
$ 408.00 -
$ 320.00 -
$ 384.00 -
$ 416.00 -
$ 521.00 -
$ 602.00
Solid content Tester is mainly used to determine the content of solid components in rubber, plastics, coatings and other materials, and is widely used in chemical industry, material prepative and other fields. Its uses include analyzing the solvent content in materials to provide data support for production and Quality control. When selecting the type, it is necessary to consider the sample capacity, Heating mode, accuracy and other points of the Tester. Users should choose the appropriate type of Solid content Tester according to the characteristics of the tested material and Solid content testing requirements to ensure the accuracy and Reliability of the test results.
Solid content Tester Application Articles
Emulsion Solid content determination
Solid content of emulsion is an important indicator to evaluate its performance. It directly affects the performance and application effect of emulsion, such as viscosity, Stability and Spreader. By understanding Solid content, you can optimize the production process, improve raw material utilization and reduce costs.
Three methods for determination of Solid content of concrete admixture
Solid content of concrete admixtures plays an important role in modern concrete technology. Solid content determination is the key to ensure the stability of its performance. In this paper, three commonly used methods for determination of Solid content are introduced in detail: drying method, dilute drying method and vacuum drying method.
Solid content determination method
Solid content refers to the percentage or mass fraction of solid matter contained in a liquid. It is an indicator that describes the concentration or content of solid matter in a liquid. Solid content is often used to describe the content of solid matter in various solutions, suspensions, emulsions, colloids and other liquid systems.
How to convert Dry-Film and wet film thickness of concrete structure paintings?
To convert between dry-film thickness and wet film thickness, you can use a parameter called "conversion rate" or "Solid content". This parameter represents the volume reduction of the Coating during the drying process.
Performance Testing Subjects and Testing Instruments of Waterborne Epoxy Resin Coatings
The coating performance test of waterborne epoxy resin coatings can currently be tested from several aspects such as coating appearance, solid content, viscosity, fineness, curing time, adhesion, impact resistance, acid resistance, alkali resistance and salt resistance. Relevant test methods can refer to the current standards of coatings.
Detection of Phenyl-acrylic Waterborne Varnish Emulsion and Film-forming Properties
The solid content, viscosity, pH, gloss, water resistance and wear resistance of phenyl-acrylic water-based varnish emulsion were tested.
Preparation of Graphene Oxide Films _ Heating Coating Machine
This paper mainly introduces the application of experimental heated coating machine in the preparation of graphene oxide films, and uses the coating machine to prepare GO films with different solid contents.
Preparation and Performance Test of Ultraviolet Curable Urushiol-Based Epoxy Acrylate Coatings
Preparation and performance testing of UV-curable urushiol-based epoxy acrylate coatings, including mechanical properties, gloss, solid content and corrosion resistance tests of UV-curable films.
Performance Test and Characterization of Polyacrylate Mixed Suspension
Performance test and characterization of polyacrylate mixed suspension: solid content test, stability test, coating film thickness test, gloss test, light transmittance test, SEM characterization, coating film rubbing resistance test and water resistance test, etc.
How to measure solid content?
The solid content is measured by GB/T 1725. After drying the clean surface dish, weigh the mass m0, accurately weigh about 1g of the sample in the surface dish, the total mass m1, and place it in the oven at 150 ± 2 ° C. After drying for 2h, the total mass m2, and carry out 3 parallel experiments at the same time to ensure that the error before and after does not exceed 0.01g.
Coating routine performance inspection items
The routine performance inspection items of coatings include fineness, viscosity, solid content, density, dryness, sagging, color, etc.
Test Printing ink Viscosity with 4 cups
Printing ink Viscosity was tested by coating 4 cups, this experiment tested the Viscosity of Printing ink formulated with waterborne epoxy resin emulsions with different Solid contents.
Adhesive coating prepared by RDS wire rod film
Adhesive coating was prepared with RDS wire rod film device, the experimental Adhesive was diluted with ethyl acetate to 10 mass% Solid content, and then a small amount of wire rod with RSD4 ink rod (coating Film thickness about 7 μm) was evenly coated on 50 μm BOPP film, a part of it evaporated at room temperature, and a part was dried at 120 ° C for 1h to obtain Adhesive coating. The coating performance can be detected.