Haze Meter

In line with GB/T 2410, ASTM D1003/D1044, 1.5 seconds results, no preheating, 21mm measurement aperture, open measurement area, vertical and horizontal measurement, Illuminant D65/A/C, Haze Repeatability ≤ 0.1, Transmittance Repeatability ≤ 0.1 units, LED Illuminant long life.

Using 380nm-1000nm Light spectrum, high measurement accuracy, a variety of measurement geometries, built-in Light source standards, built-in integrating sphere, a variety of fixtures or accessories optional, horizontal or vertical placement, for material total transmittance, Light spectrum light transmitter at different wavelengths, haze and material under specific Light source light color performance test

Aperture, large size touch screen, easy to operate, PD array Detector, to meet the CIE V (lambda) 2 degree visual Response can achieve high-precision and repeatability Transmittance and haze measurement. USB data output device, can be docked with the laboratory system.

Measurement parameters: Haze, Transmittance, Light spectrum Response: CIE Light spectrum function Y/V (lambda), Optical path structure: 0/d, Illumination and sample aperture: 15mm/21mm, Haze resolution: 0.01 units, Transmittance resolution: 0.01 units, Measurement range: 0~ 100%, no need to warm up, test only 2 seconds, support vertical and horizontal measurement, store 20,000 sets of data, meet ASTM D1003, ISO13468, GB/T2410 and other standards

Compliant with GB/T 2410, ASTM D 1003, ISO 13468, ISO 14782 standards, no need to warm up, 2 seconds results, 21mm/7mm two measurement diameters, 7 inch capacitive Touchscreen, CIE-A, CIE-C, CIE-D65 three Illuminant, haze self-calibration, vertical + horizontal measurement, open area, LED Illuminant

Can compare haze, light transmitance, color difference and other parameters, while supporting ASTM and ISO standard 7 inch large touch screen, simple operation, dual aperture design, small size material can also be measured and repeability is good, can be Measurement

Suitable for light transmitance and haze measurement of transparent and translucent materials. Adopt parallel lighting and integrating sphere photoelectric reception mode, microcomputer automatic operating system, support 2000 sets of data storage and USB interface to communicate with PC. Both light transmitance and haze can be accurately displayed to 0.01%

It adopts parallel lighting and integrating sphere photoelectric receiving mode, and has a microcomputer automatic operation and data processing system, which is easy to operate, has no zero drift, and has accurate measurement results. Its open sample window supports samples of various sizes, with fast measurement speed and is not affected by environment light

Glass, film, plastic, LCD panels and other transparent translucent products clarity, haze, transmittance, Light spectrum transmittance, color difference (Lab value, YI value) and other parameters detection, in line with GB/ASTM/ISO standards, open measurement, no preheating, not affected by environment light

Suitable for light transmitance and haze measurement of transparent and translucent materials, using parallel lighting and integrating sphere photoelectric reception mode, with High Accuracy measurement capability (light transmitance to 0.01%, haze to 0.01%)

Follow ASTM and ISO haze measurement standards, A, C, D65 kinds of Illuminant, transmittance compensation measurement, 0/d light path structure, haze ≤ 0.05% Repeatability, 7 inch Touchscreen, open measurement area, rich fixture

It supports ASTM D1003 and ISO 13468 standards, Transmittance and haze measurement, equipped with a variety of observation Light sources and 256 pixel CMOS sensors, easy to operate and accurate data. Suitable for Glass, Plastic, Film, Display and other industries, Data analysis software and USB data output function are provided.

Light spectrum LED Light source and Light spectrum Sensors, light transmitance Repeatability ≤ 0.03, providing 5mm and 14mm measurement aperture, support horizontal or vertical placement, adapt to a variety of test scenarios.

Light source, integrating sphere size, lighting Light source 400~700nm; Large size touch screen, with compensation port; Independent Light source Detector and temperature sensor; Open measurement area, vertical and horizontal testing; with quality management software.

Should 20mm measurement diameter, large size touch screen, easy to operate, using PD array Detector, to meet the CIE V (lambda) 2 degree visual Response can achieve high-precision and repeatability Transmittance and haze measurement. USB data output device, can be docked with the laboratory system.

φ 20mm measurement aperture, ASTM D1003 non-compensation method, ISO 13468 compensation method, full light transmitter, haze test, open sample compartment can be erected and horizontal test, to adapt to more tested samples. PD array Detector, to meet the CIE V (lambda) 2 degrees Visual Response, compensation method measurement

Support ASTM D1003 and ISO 13468 standards, accurate measurement light transmitance, haze and chroma data. CMOS Detector, 7-inch touch screen, easy operation and stable data. Support a variety of observation light sources, open measurement area to adapt to a variety of samples, USB, Bluetooth output

Support ASTM D1003 and ISO 13468 standards for accurate measurement of light transmitance, haze and chroma data. CMOS Detector, 7-inch touch screen, easy operation and stable data. Support multiple observation light sources, open measurement area to adapt to different samples, USB, Bluetooth output

Compliant with ASTM D1003 and ISO 13468 standards, supports full light transmitance and haze testing. PD array Detector, 7-inch touch screen, open sample compartment supports vertical, horizontal, dynamic measurement functions, USB data output, equipped with professional analysis software

Realize ASTM D1003 non-compensation method, ISO 13468 compensation method, full light transmitance, haze test, clarity test, through precision concave grating and 256 pixel CMOS Detector can accurately collect the transmittance of the transmission sample Linear dispersion, accurate output of various chroma data of the transmission sample, can achieve high-precision and repeability light transmitance, haze and chroma data measurement.

ASTM D1003 non-compensation method, full light transmitter, haze test, open sample compartment can be vertical, horizontal test, to adapt to more samples. PD array Detector, to meet the CIE V (lambda) 2 degree Visual Response, compensation measurement method can achieve high-precision and repeatability of light transmitter and haze data measurement.

With accurate measurement capabilities in line with international standards, equipped with powerful quality management software, fast measurement functions, flexible sample adaptability and USB data output.

Realize full light transmitance, haze, clarity and other tests under ASTM D1003 non-compensation method, ISO 13468 compensation method and other standards, with open measurement area, vertical and horizontal testing, to adapt to more tested samples.

Integrating sphere size φ 154mm, measurement aperture φ 15mm, dual standard ISO & ASTM, a variety of observation light sources, with compensation port, independent light source Detector and temperature transducer, open measurement area, can be vertical and horizontal test, adapt to more tested samples