Sampler

Pneumatic, capable of sampling 10mm, sampling error ± 0.35cm2.

Blade movement straight line and baffle verticality ± 0.10mm, cutting sample size tolerance ± 0.5mm, simple structure and high Precision, easy to maintain.

The sample area is 125cm ², and the sample accuracy is ± 0.35. It is a sampling instrument for quantitative determination required for production and scientific research. It is designed according to the QB/T1671 national industry standard.

Sampling size 25 * 100mm (edge pressing sample)/25 * 80mm, sampling size error ± 0.5mm, sampling length 220mm, sampling thickness range 18mm, adjustable spacing 25, 80, 100mm

It is suitable for paper quantitative determination and sampling of standard samples of thin-slice burst resistance experiment, in line with QB/T 1671-98 standard. Using simple pressure bar operation, the sampling area is 100cm ², and the error is controlled at ± 0.35cm ², which is suitable for the thickness range of 0.1~ 1.2mm.

Sampling size φ 125mm, stamping type, sampling area 100cm ² +/- 0.2cm ², blade 10 years free replacement, 304 stainless-steelbeaker body, mg aluminum cup lid acid and alkali resistance, pure copper guide rail copper sleeve.

Clamping length 152 × 12.7mm, thickness range 0.1~ 1.0mm, thickness deviation ≤ 0.01mm, 13 sub-discs + 1 master disk, in line with GB/T 2679.8 and other standards

The sampling size is 152 * 12.7mm, the parallelism of the two long sides is less than or equal to 0.015mm, the sampling thickness range is 0.05~ 1.2mm, and the GB/T 2679.8 and other standards are implemented. It is suitable for paper, Cardboard, film, Spinning & weaving materials, etc.

Sampling size 152 × 12.7mm for ring pressing, 200~ 250 × 15mm for stretching, folding resistance, weight 35kg, in line with TAPPI-T409, JIS-P8113 standards, precision blade combination, sample edge flat, easy to operate.

Sampling area 100mm ², sampling Film thickness (0.1~ 1.2) mm, for paper, Cardboard gram weight measurement.

Sampling area 100cm ², error +/- 0.35cm ², sampling thickness paper 0.1 to 1.2mm, Corrugated Board 0.1 to 7mm, sharp edge, removable handle, with anti-cutting hand protection device.

Sampling area 100cm2, sampling error +/- 0.35cm2, Precision +/- 0.2mm, parallelism ≤ 0.05mm, sampling thickness 0-10mm, foot-operated pneumatic pressure, cylinder pressure 1.5T, widely used in Cardboard, fiber materials, sheet materials Basis Weight sampling

Sampling diameter 112.8mm, sampling Film thickness range of 0.1~ 1.2mm, suitable for paper and sheet materials, to ensure uniform sample standards.

Sampling size φ 125mm, sampling error +/- 0.2mm, sampling thickness 0.1~ 1.5mm, special blade does not need to be replaced for 10 years, 10,000 wire high-precision wire cutting, triple quenching precision grinding, three-point positioning coaxial concentric structure, pure copper wear-resistant copper sleeve.

The stamped sampling design is equipped with a special 18 steel knife edge, the sample diameter is 112.8mm, and the sampling area is 100cm ², which is suitable for accurate sampling of 0.1-1 mm thickness of various materials.

Sampling size 125mm, error +/- 0.2mm, thickness range 0.1-1 mm, stamping sampling, knife edge quenching treatment, sampling labor-saving without burrs.

Sampling thickness range 18mm, sampling size 25 * 100mm or 25 × 80mm, sampling width 25 +/- 0.5mm, linear guide, W piece, adjustable multiple gears for one positioning.

Sampling area 100cm2, sampling error +/- 0.25cm2, sampling thickness 0.01-1 mm, special No. 10 steel knife edge, punching without burrs, integrated casting structure.

Sampling size 152 * 12.7mm, parallelism ≤ 0.015mm, thickness 0.1~ 1.2mm, support RCT, ECT, PAT, FCT, CMT, CCT detection, in line with GB/T and ISO standards

The sample area is cut, the sample cutting accuracy is ± 0.35, the appearance is beautiful, the structure is compact and reasonable, the installation is convenient, and the operation is labor-saving. It is a quantitative measurement sampling instrument required for production and scientific research.

Sampling size 70 × 38mm, 38 × 36mm, sampling thickness 0.1-1 mm, sampling error +/- 0.2mm, tool hardening and wear resistance, stainless steel bearing operation is light, stamping sampling.

Sampling size 70 × 38mm, parallelism of two long sides ≤ 0.015mm, sampling thickness 0.1~ 1.2mm, weight 10kg, crease sampling size 38 × 36mm

Thrust sampling design, can cut 25mmx100mm edge pressure sample and 25mmx80mm gluing sample, sampling thickness range of 18mm, the error is only ± 0.5mm.

Sampling size 140mmx25.4mm, sampling thickness ≤ 1mm, weight about 15kg, supporting Interlayer bond strength tester sampling, in line with QB/T 1671 standard.