Potentiometric Titrator

Measurement range 100ppm to 100%, resolution 1ppm, Measurement pump accuracy +/- 0.1%, built-in automatic drift correction, support 100 titration methods, sealing solvent system, automatic Balance interface, user-defined report.

Point matrix LCD button operation; support dynamic, preset endpoint, equal amount, manual titration; acid-base, oxidation reduction, settling, complexation, non-aqueous titration; pH measurement; 50 sets of results, in line with GLP; RS-232 printing; PWM speed regulation and low noise; power-off protection; firmware upgrade

PH range 0~ 14pH, accuracy +/- 0.01pH, input Impedance ≥ 1 × 10 ^ 12Ω, control accuracy +/- 0.03pH, Repeatability ≤ 0.3%, automatic polarity reversal, automatic tracking, touch control

Moisture content ranging from 1 ppm to 5%, resolution 0.1 ppm, dynamics with 3 speed settings, statistical mean of results, standard deviation, powerful built-in algorithms for termination criteria based on fixed mV endpoints or absolute/relative drift.

Equipped with a 7-inch color Touchscreen, the navigation operation is intuitive and convenient. Support Potentiometric titration, poten-tiometry, pH/pX/Ion concentration measurement, built-in 200 sets of titration methods, can expand a variety of detection modules. Burette resolution up to 1/50000, supports a variety of titration modes and complex titration applications.

pH range - 2.000 to 20.000pH, accuracy +/- 0.001pH, mV range +/- 2000.0mV, accuracy +/- 0.1mV, temperature accuracy +/- 0.1 ℃, supports acid and alkali, anhydrous, oxidation reduction, settling, complexation titration, one key titration, GLP Data storage printing, Automatic sampler compatible, waterproof and chemical corrosion resistant.

Building materials industry-specific, to meet GB/T176/8077 in the chloride ion potential Titrimetric method, cement, concrete, concrete admixtures in the chloride ion content of the test, built-in method in accordance with the requirements of the relevant standards, the results of direct reading.

Suitable for a variety of Potentiometric titration, poten-tiometry, pre-control potential (pH) adjustment, ZD-2 Potentiometric titrator can simultaneously measure mV (ORP), ph value. Used in scientific research, teaching, chemical industry, environmental protection and many other fields.

Support acid and alkali, anhydrous, oxidation reduction, settling, complexation titration, pH Measurement accuracy +/- 0.001pH, Burette resolution 1/40000, delivery accuracy +/- 0.1%, storage 100 methods, can be connected Automatic sampler, waterproof and anti-chemical corrosion.

7-Inch Touchscreen, Navigation operation, Support permanent stop titration, valve Burette integration, corrosion resistance pipeline, non-water titration, up/down stirring, Repeatability ≤ 0.2%, Burette resolution 1/50000, polarization current detection error +/- 2% FS, Data storage 1000 sets, three-level permissions, GMP management, RS-232/USB interface, U disk export CSV/PDF.

Potentiometric titrator, point matrix LCD, button operation, support preset end point, manual titration, acid-base, oxidation reduction, settling, complexation, non-aqueous titration and pH measurement, 20 sets of results, GLP, RS-232, Chinese and English, power-off protection.

Polarization current four gears, support manual automatic titration, automatic end point determination, slow drop state, standard Stirrer double platinum Electrode external Burette

Fully automatic titration analysis system, four parallel lines, 112-position automatic injection, Repeatability ≤ 0.2%, Potential range -2000~ 2000mV, pH resolution 0.001pH, support multi-titration mode, corrosion resistance pipeline, GLP data management, Modular design.

Portable, high definition liquid crystal display, key operation, minimum addition volume 0.01mL, Basis Weight and dynamic two kinds of liquid mode, support cleaning, emptying, liquid replenishment, titration, clearing, Burette coefficient can be set, reversing valve Reagent, titrator and controller interchange does not affect the accuracy, lithium battery power supply, power prompt, backlight adjustment, automatic shutdown.

Tower structure, removable turntable, compatible with different size sample cups, support 16-bit 50mL, 15-bit 100mL, 14-bit 200mL sample tray, sample positioning and cleaning, diaphragm pump and peristaltic pump spray cleaning, up/down stirring optional, self-test and fault tolerance, USB and RS232 dual interfaces.

Double tower surface removable turntable, compatible with multi-specification sample cup, 30/24/18 position sample tray, sample positioning and cleaning, stirring and spray cleaning, diaphragm pump and peristaltic pump, up/down stirring optional, self-test fault tolerance, USB and RS232 interface.