Nitrogen Evaporator

Model RHDCY-12, 12 holes, temperature control accuracy +/- 0.5 ℃, display accuracy +/- 0.1 ℃, Temperature range room temperature + 5~ 150 ℃, Lift Travel 200mm, air needle independent anti-cross contamination, aluminum block bath uniform heat transfer, digital temperature control.

RT + 5 ℃ -150 ℃, Heating time: ≤ 15min (20 ℃ to 100 ℃), number of modules placed: 2, air needle length: 150mm, standard 2 HX07 modules

RT + 5 ℃ -150 ℃, Heating time: ≤ 15min (20 ℃ to 100 ℃), air needle length: 150mm, number of placing modules: 1, standard 1 HX07 module

24-Bit Sample Handling, temperature control accuracy +/- 1 ℃, unique self-equilibrating suspension lifting system, each Gas flow rate can be adjusted individually, suitable for a variety of testtube specifications.

24-Hole Sample Handling, Aperture 16 mm * Hole depth 50 mm, Temperature control accuracy +/- 0.5 ℃, Digital temperature control, Gas flow rate 0~ 15L/min, Aluminum block heating, Blowpipe independent anti-cross contamination, Air needle channel can be used alone.

Flow rate can be independently controlled for each air needle. Temperature control accuracy reaches ± 0.5 ℃. Module temperature difference at 40℃ is only ± 0.3 ℃. 150mm long air needle is suitable for different containers.

Timing/Basis Weight/evaporation mode, can condense 1~ 8 samples at the same time, sample volume ≤ 200mL (with 0.5mL & 1.0 Basis Weight scale); water bath capacity 8L; air pressure adjustment 0~ 0.4Mpa; temperature control room temperature to 90 ℃; temperature control accuracy +/- 0.5 ℃; water bath heating

12 samples, 7kg, water bath heating, tuberack, 15mm, +/- 1 ℃, RT +~ 100 ℃, 330ml/min/sample, 0~ 15L/min, 600W, PID temperature control, over-temperature alarm, each gas path can be switched and adjusted separately Flow rate, self-equilibrating lift, 316 stainless steel material.

48 samples are processed simultaneously, temperature control accuracy +/- 1 ℃, using 316 stainless steel material, Gas flow rate can be adjusted separately, suitable for small quantities of multi-sample condensing.

24 independent temperature control, 24 samples, water bath heating, temperature control accuracy +/- 1 ℃, Temperature range RT +~ 100 ℃, nitrogen consumption 330ml/min/sample adjustable, air needle independent switch, Flow rate adjustable per channel, 316 stainless steel material.

12 samples are processed simultaneously, temperature control accuracy +/- 1 ℃, 316 stainless steel material, Gas flow rate can be adjusted separately, suitable for 10~ 55mm testtube, to meet different experimental needs.

36-Bit Sample Handling capability, temperature control accuracy +/- 1 ℃, self-equilibrating suspension lifting system and independent gas path adjustment function to meet different experimental needs

Each purge needle can independently control Flow rate, air needle position adjustable, temperature control accuracy of ± 0.5 ℃, suitable for 40~100℃ range, Heating time ≤ 30 minutes.

Sample number: 12 holes, testtube size: 16mm, nitrogen consumption: 330ml/min/sample, Temperature range: room temperature to 100 ℃, temperature control accuracy +/- 0.5 ℃, purge and capture technology implementation

36 holes, 16mm testtube, nitrogen consumption 330ml/min/sample adjustable, Gas flow rate 0-15L/min, temperature control +/- 0.5 ℃, room temperature~ 100 ℃, digital temperature control, no oxygen condensing.

36-Hole Sample Handling, aluminum block bath heating uniform, no oxygen condensing anti-cross contamination, air needle independent use, temperature control accuracy +/- 0.5 ℃, digital temperature control room temperature + 5~ 150 ℃, Flow rate 0-15L/min, lift 200mm

24-Hole sample, testtube size is 16mm, nitrogen consumption is 330ml/min/sample adjustable, temperature control accuracy +/- 0.5 ℃, Temperature range -100 ℃, digital temperature control, purge and capture technology, oxygen-free condensing.