Softening Point Tester

Digital dial meter, touch screen, computer operation, used to measure the thermal softening performance of plastic raw materials or finished products. By changing the indenter, the instrument can measure the thermal deformation temperature and Vicat temperature, and supports the thermal deformation and Vicat softening point of various samples specified by the standard. Thermostatic pretreatment, highlighting Linear dispersion display, report editing

Can measure the drop point and softening point of two samples at the same time, configure high definition camera, 200 kinds of pre-storage Measuring method, optional audit tracking, electronic signature traceability, can store 128G storage space.

The new national standard design is used to measure the thermal softening performance of plastic raw materials or finished products. By replacing the indenter, the instrument can measure the thermal deformation temperature and Vicat temperature. Standard configuration of 3 stations, support customization, standard GB/T1633, GB/T1634, GB/T8802.

Suitable for measuring the drop point and softening point of amorphous polymers, in line with ASTMD3461-97 standard, support automatic detection, Temperature range RT+~ 300℃, adjustable heating rate, liquid crystal display, accurate reading

The volume of the glass is 600 mm, the weight of the steel ball is 2, 3.45 - 3.55 grams, and the diameter of the steel ball is 9.53 milligrams.

Can measure the drip point and softening point of two samples at the same time, configure high definition camera, 100 kinds of pre-storage Measuring method, can store 64G storage space.

RT +~ 300 ℃, heating rate (120 +/- 10) ℃/h, etc., Temperature Indication Error 0.1 ℃, Temperature control accuracy +/- 0.5 ℃, Maximum Deformation Indication Error +/- 0.001mm, Deformation measurement 0~ 1.5mm, 3 sample racks, PLC control, sample rack lifting

Temperature control range Room temperature~ 300℃; Maximum deformation Measurement range 1mm (Vicat test); 0.33 mm (thermal deformation), by running the PID program (in the instrument) to give the corresponding heating parameters, so that the test can be carried out safely and reliably, thus ensuring the safety and reliability of the test, is a chemical enterprises, R & D institutions, Universities & colleges and other lines of common testing tools.