Anti-Sag Meter

Paints sag test; 50-275μm range, 25μm Graduation; stainless steel; meets GB9264 standard; does not apply to varnishes and powder coatings.

The range is 450-675 μm, using S136 high quality stainless steel, application width 73.5mm, Total length 120mm, in line with GB/T9264 and ASTM D 4400 standards.

The range is 50-275μm, using S136 advanced stainless steel, the application width 735.mm, the Total length is 120mm, in line with GB/T9264 and ASTM D 4400 standards.

Paints sag test; 250-475 μm range, 25 μm Graduation; stainless steel; conforms to GB9264 standard; does not apply to varnishes and powder coatings.

50-275Um, 250-475um, 450-675um film thickness range, three multi-groove coating scraper, 10 parallel wet-film of different thicknesses, adjacent film thickness difference of 25um, execution standard GB/T 3186, Paints test relative sag.

The range is 850-1075μm, using S136 advanced stainless steel, application width 735.mm, Total length 120mm, in line with GB/T9264 and ASTM D 4400 standards.

The range is 650-875 μm, using S136 advanced stainless steel, application width 735.mm, Total length 120mm, in line with GB/T9264 and ASTM D 4400 standards.

The range is 250-475μm, using S136 advanced stainless steel, application width 735.mm, Total length 120mm, in line with GB/T9264 and ASTM D 4400 standards.

The LGB type sag board is designed with four uniform volume spherical concave holes for placing samples or master standards, which simply realizes the quantitative requirements. The concave hole volume is 1.29cm3, and the film thickness range is 0~10inch; Metric 1~ 25cm.

Line standard GB3186, film thickness range 50~675μm (50~275um; 250~475um; 450~675um), Graduation 25μm, application width 6mm, Graduation 25μm, wet-film spacing 1.5mm.

Paints used to determine the relative sag, film thickness range of 850~1075 μm, Graduation of 25 μm.

Paints used to determine the relative sag, film thickness range of 450~675 μm, Graduation of 25 μm.

Paints used to determine the relative sag, film thickness range of 650~875 μm, Graduation of 25 μm.

Film thickness 650/675/700/725/750/775/800/825/850/875μm, wear and corrosion resistant alloy steel material, in line with GB/T 9264, ASTM D 3730 standards.

Film thickness 850/875/900/925/950/975/1000/1025/1050/1075μm, wear and corrosion resistant alloy steel material, in line with GB/T 9264, ASTM D 3730 standards.

Adopting wear-resistant and corrosion-resistant alloy steel, the film thickness range is 50-275μm, and the 10 grooves design can accurately determine the paint flow performance, which is suitable for vertical, corner and other complex workpiece painting control.

Film thickness 450/475/500/525/550/575/600/625/650/675μm, wear and corrosion resistant alloy steel material, in line with GB/T 9264, ASTM D 3730 standards.

Film thickness 250/275/300/325/350/375/400/425/450/475μm, wear and corrosion resistant alloy steel material, in line with GB/T 9264, ASTM D 3730 standards.

Range 450-1000μm; in line with GB, ISO, ASTM standards; 50/100μm Graduation, the number of grooves 10.

Film thickness range 50~275μm, Graduation 25μm, material stainless steel, dimensions 120 * 22 * 20mm.