PUSHEN ZQ-V Conical Mandrel Bending Tester

ZQ-V

Conical Mandrel Bending Tester

Conical bending measurement; in line with GB11185, ISO6860 standards; material is stainless steel; small size, light weight.

ZQ-V Cone Bending Tester is a simple and fast method for measuring the elasticity of coatings. It only needs to place the test plate on a cone of known diameter and bend it. Follow the graduated scale on one side and then check for cracking, peeling or other damage to the coating. ZQ-II paint film cone shaft bending tester is designed and manufactured according to GB11185-89 and ISO6860-1984 standards and referring to similar foreign products. It uses the different curvature of the cone shaft to test the coating when it is bent around the shaft under standard conditions. Anti-cracking or peeling performance from the metal floor. Its advantages are small size, light weight, and it is used for experiments in laboratories and construction sites.

Standards

GB/T 11185

ISO6860

Packing list：Conical Mandrel Bending Tester X1, Instruction Manual X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.