QXP0-25S double-channel Fineness gauge YONGLIDA QXP Fineness gauge
SE0~25μm range, 2.5μm scale, for fineness determination in inks industry, Cr12 molybdenum vanadium double-channel
$235.00/piece
PromotionLoading...
Coupon
Model：
QXP0-25S
Similar products
-
JINGKELIAN QXP 0-25S ISO Fineness of Ground Gauge Fineness gauge 0~25μm/2.5μm$ 192.00SE -
JINGKELIAN QXP 0-25S ISO Fineness of Ground Gauge with Third Party Measurement Certificate$ 254.00SE -
TQC VF2105 single-channe grinding Fineness of Grinding Gauge 0~25μm with calibrated certificate$ 1044.00SE -
TQC VF2111 double-channel Grindometer 0-25 µm with calibrated certificate$ 980.00SE -
MODERNER QXD 25 Large double-channel Fineness gauge Fineness range 0~25μm
YongLiDa QXP0-25S ISO Fineness of Ground Gauge (double-channel)SPEC
YongLiDa QXP0-25S ISO Fineness of Ground Gauge (double-channel)Details
YongLiDa QXP0-25S ISO Fineness of Ground Gauge (double-channel)Packing list
- SKU
- NB004080
- Scraper type
- double-channel
- Number of grooves
- 2
- range
- 0 ~ 25µm
- Scale unit
- mm
- Scraper material
- Cr12 molybdenum vanadium
- Scraper size
- 175*65*13mm
- Graduation
- 2.5µm
QXP0-25S
ISO Fineness of Ground Gauge (double-channel)
0~25μm range, 2.5μm scale, for fineness determination in inks industry, Cr12 molybdenum vanadium double-channel
Introduction of QXP0-25/50/100S double channel Fineness gauge
Yonglida QXP double-channel Fineness gauge is an ISO Fineness of Grind Gauge with two grooves. According to the fineness range, it is divided into three models: QXP0-25S, QXP0-50S, and QXP0-100S. The measured fineness range They are 0~25μm, 0~50μm, 0~100μm, and the division values are 2.5μm, 5μm, 10μm respectively. QXP0-25/50/100S double-slot fineness plate can be used in the experiment of the standard "Determination of Coating Fineness".
QXP0-25/50/100 double channel Fineness gauge display
FAQ
QI want to do a test on the ASTMD1210-05 standard. Is this Fineness gauge okay?
A
Sure
QCan the YONGLIDA QXP25S Fineness gauge be used to scrape 18μm pigments?
A
Yes, the ISO Fineness of Ground Gauge (double-channel) scraping 0~ 25μm or less material fineness.
QFineness measurement Printing ink is used for this Fineness scraper?
A
Yes, Printing ink Fineness is relatively small, you can choose the appropriate range according to your actual situation.
Knowledge
- 1Fineness Detection of Precious Metal Slurry in Microelectronic Technology with Fineness Meter
- 2Frequently Asked Questions about Fineness Plates in 2022
- 3Coating Fineness Determination and Its Importance
Standard
- 1GB/T 17001.3-2025《Anti-counterfeiting printing ink—Part 3：Thermochromic anti-counterfeiting printing ink》
- 2GB/T 17473.2-2008《Test methods of presious metals pastes used for microelectronics - Determination of fineness》
- 3GB/T 42541-2023《Coated steel pipes for gas piping》
- 4GB/T 17001.6-2022《Anti-counterfeiting printing ink—Part 6：Infrared excitation fluorescence anti-counterfeiting printing ink》
- 5HG/T 5776-2020《Water-based coatings for surface of rubber sealing products》
- 6HG/T 5370-2018《Waterborne coatings for bicycles》
- 7HG/T 5175-2017《Water-based decorative coating for glass and ceramic products》
- 8QB/T 2025-2013《Offset tin-printing ink》
- 9JT/T 821.2-2011《Anti-corrosive coatings for concrete bridge surface.Part 2:Wet-surface tolerant coatings》
- 10JT/T 821.1-2011《Anti-corrosive coatings for concrete bridge surface.Part 1: Solvent based coatings》