CHINA BLD-CJ21 Impact Tester Plastic, Ceramic, Acrylic fiberglass

BLD-CJ21

Drop Impact Tester

Test plastic, ceramic, acrylic, fiberglass and other materials, drop height 0-1500mm adjustable, in line with JIS-K6745, A5430 test standards.

Introduction

The falling ball impact testing machine is used to test the solidity of plastics, ceramics, acrylic, glass fabrics and other materials and coatings. This equipment complies with JIS-K6745 and A5430 test standards. This machine adjusts a steel ball of a certain weight to a certain height, allowing the steel ball to fall freely and hit the sample. The degree of damage is used to judge the quality of the test product.

Structural features

The structural features of the falling ball impact testing machine are as follows:

1. Ball drop device: The testing machine contains a specially designed ball drop device, which usually consists of a guide rail, a release mechanism and a ball. The mass and diameter of the sphere are determined based on the required impact energy and test standards.

2. Height adjustment system: The testing machine has an adjustable height system to control where the ball falls freely to control the energy and position of the impact. Height adjustment is usually achieved using a screw mechanism or air pressure control.

3. Test stand: The testing machine is equipped with a stable test stand for supporting and fixing the samples to be tested. Test benches usually have anti-slip and shock-absorbing functions to ensure the stability and safety of the testing process.

4. Data recording and display system: The testing machine is equipped with a data recording and display system, which can record and display test data such as impact force, impact energy, and damage form in real time. This data is critical for evaluating the material's impact resistance.

Packing list：host X1, manual X1, certificate X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.