PUSHEN /Pushen ZBQ 50-200um Film Applicator coating Film Applicator 80mm

ZBQ 50-200um

4-Sided Film Applicator

4-Sided type, Film thickness 50/100/150/200μm, Spreader width 80μm, material stainless steel.

For many products such as paints, inks, varnishes, glues and cosmetics, the reliability of many laboratory tests is directly related to the quality of the samples provided. Especially in paints, varnishes, paints, inks, glues and cosmetics etc. Whether you are to illustrate the appearance characteristics of the product or such as color, gloss, dryness and hiding power, etc., and no matter what kind of coating you are testing on, the most basic condition is that the sample needs to be uniform, comparable and accurate in thickness control .

Pushen's single-sided or four-sided Wet Film Applicator is made of hard stainless steel. It is suitable for scraping a film layer of specified thickness and width on a flat and solid substrate. Each Film Applicator has one or 4 high-precision fixed film thicknesses to ensure accuracy, and a variety of film widths can be customized.

Product information of multi-faceted I-shaped wet film device

Coating film width: 80mm      

Model: 50/100/150/200μm  

Brand: Pushen

Total length: 100mm

Weight: 300g 

Size: 100×18×18mm

Introduction of paint leveling

The so-called leveling property of the coating refers to the smooth and smooth state of the coating film after the coating is applied.
If the surface has good leveling properties, there will be no irregularities such as orange peel, brush marks, ripples, and shrinkage cavities. Usually people directly observe with the naked eye to compare the sample with the standard sample in parallel to judge the quality of the leveling property of the coating film. This method varies from person to person and is highly subjective.

The multi-faceted I-shaped wet film device is widely used:

Due to the convenience, simplicity and rapidity of the operation of the Fineness Meter, it plays an important role in the particle measurement of coatings, inks, dyes, powders and pigments.

It is used to measure the particle size and degree of dispersion of pigments and impurities in paints, pigments, color pastes, inks and other liquids or slurries, known as fineness detection, so as to control the quality of dispersed products in production, storage and application. Widely used in plastics, pigments, printing inks, paper, ceramics, medicine, food and other fields.

Advantages of multi-faceted I-shaped wet film device

●The material is high-grade stainless steel, which ensures that the applicator is not corroded by acidic or alkaline substances in paint or cleaning agents.
●Mainly used to coat a certain thickness of wet film to measure the color and hiding power of the sample or to prepare a sample, etc.
●Multi-face I-shaped wet film device can be applied to coat 4 different film thicknesses.
You only need to change the angle to get 4 different paint film thicknesses, and the operation is simple and convenient.

Multi-face I-shaped wet film device model selection:

Packing list：Applicator x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.