Defelsko

Measurement range 0~1500μm, error range +/- 1%, can be used for underwater measurement.

Measurement range 0~625μm, error range +/- 3%, the probe has a quick release adapter to align small, flat or curved parts with constant pressure, suitable for measurement of small parts, hard-to-reach areas or near edge measurement.

Measurement principle: magnetic Induction + eddy Current, is a dedicated PosiTector6000 series Thickness Gauge host, used for measurement of thickness range of 0~1500μm, error range +/- 1% dual-use Coating Thickness Gauge probe.

The thickness measurement range is 0~6000μm, which can be used with the PosiTector6000 series host. It is suitable for the measurement of epoxy resin, rubber, cement, expansion fire-proof coatings and other thick coatings.

Measurement range 20-110μm, Sensitivity 1μm, accuracy +/- 5μm, Response time 2-5s, measurement distance 18mm, non-contact powder coatings Thickness Gauge, only need to measure the powder thickness before curing to predict the Coating thickness after curing.

Number of cutter teeth 6, cutter tooth spacing 1mm, suitable for film thickness environment 0~60μm, cutter head material hardened, application standard ISO 2409.

The number of cutter teeth is 11, the cutter tooth spacing is 1mm, the film thickness environment is 0~50μm, the cutter head material is hardened, and the standard ASTM D3359 is applied.

The number of cutter teeth is 11, the cutter tooth spacing is 1mm, the cutter head material is hardened, and the standard ASTM D3359 is applied.

Number of cutter teeth 6, cutter tooth spacing 2mm, suitable for film thickness environment 0~50μm, cutter head material hardened, the application of standard ASTM D3359.

Replacement tape roll for PosiTest CH cross-cut adhesion testing for the PosiTest CH ISO kit, applying standard ISO 2409, Packaging Dimensions 25mm * 65.8m/roll.

Number of cutter teeth 6, cutter tooth spacing 1mm, cutter head material hardened, apply standard ISO 2409.

Number of cutter teeth 6, cutter tooth spacing 3mm, cutter head material hardened, apply standard ISO 2409.

Number of cutter teeth 6, cutter tooth spacing 2mm, cutter head material hardened, apply standard ISO 2409.

Replacement tape roll for PosiTest CH cross-cut adhesion testing for PosiTest CH ASTM kits. Apply standard ASTM D3359, Packaging Dimensions 25mm * 82.3m/roll.

Number of cutter teeth 6, cutter tooth spacing 2mm, suitable for film thickness environment 121~ 250μm, cutter head material hardened, application standard ISO 2409.

Number of cutter teeth 6, cutter tooth spacing 2mm, suitable for film thickness environment 61~ 120μm, cutter head material hardened, application standard ISO 2409.