JingKeLian

The QGY paint film stackable Tester is used to test the damage resistance performance of the painted surface, which meets the GB/T9280 standard and comes standard with three mass weights of 100g, 200g and 500g.

Device for measuring solvent wiping resistance of coatings, reciprocating wiping on the surface of the sample with solvent wetting absorbentcottonph, the number of wipes required for coating damage, can evaluate the solvent wiping performance of the coatings. Execution standard GB/T23989.

Application standard GB/T14623.3 standard, Glass platen weight 115 +/- 0.5g, inks sample volume 0.5 cubic centimeters +/- 0.003 cubic centimeters, plate maximum Measurement range diameter 9cm, indication resolution value 0.1cm.

Specially designed for stain resistance testing of architectural exterior coatings. Water tank volume 15L, flow pipe inner diameter 8mm, time control 0~99h99s.

The funnel angle is 60 °, the inner diameter of the catheter is 19mm, the length of the catheter is 914mm, and the angle of the sample holder is 45 °, according to the standard GB/T5237.5-2000.

The QKL-II initial drying crack resistance Tester designed and manufactured according to the national standard GB9779-88 is mainly suitable for the initial drying crack resistance test of architectural coatings and indoor and outdoor building putty under the condition of specified wind speed.

Impact height 1265mm, drop weight mass 1000g, 2 pounds, punch diameter φ 15.9mm, φ 20mm, Impact depth 10mm, die base aperture φ 27mm, φ 17mm, table size 300 * 240 * 35mm, meet the standard ISO6272M, ASTMD2794 and so on.

Touch screen control, the size of the coating strength, Hardness and adhesion are characterized by the size of the anti-penetration ability of the paint film sample coating when it is scratched by the scribe.

Technical parameters Light source Illuminance: not less than 1200X, distinctness of image level 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.2 1.5 2.0 Style area: not less than 60 * 60mm

Single-Channe, QXD type Fineness gauge, range 0~25μm, scale unit μm, Graduation 2.5μm, scraper material stainless steel, scraper size 155 * 50 * 12mm, standard GB1724

In line with the standard GB/T1748-79, the test film metal bending film, the shaft rod size diameter 50mm, 100mm, the thickness of the test plate substrate 0.2-0 mm, the test plate substrate material tinplate.

The number of strokes is 4, the size of the strokes is R 0.25/0 5/1.0/1.5mm, the stroke is φ 100mm, the track period is 6/12/24 h/T, the execution standard GB/T1728-79, and the measurement error is +/- 0.5%.

Meet the standards GB/T1723-93, ASTMD2794, ASTMG14, IBCI5C139, Impact height 120cm, hammer mass 1.0, 1.36, 2.0kg, Striker Diameter φ 8mm, φ 15.87mm, φ 20mm, Impact height 0~120cm.

Instrument specially designed for the determination of non-stick tire drying time of road marking paints in GA/T298-2001 standard. Tire size φ 241 +/- 6mm, instrument weight 15.8 +/- 0.2kg.

The volume of the glass is 600 mm, the weight of the steel ball is 2, 3.45 - 3.55 grams, and the diameter of the steel ball is 9.53 milligrams.

Impact height 40cm, sub-scale 5mm, drop weight mass 500g, table size 200x250mm, meet the standard GB/T 4893.9-92, Impact steel ball φ 14-0.01 HRC60~66 (GB308), sample size 200x180mm.

ISO1524 single-channe Fineness of Ground Gauge, stainless steel, range 0 to 50 μm, scale unit μm, Graduation 5 µm, with third-party Measurement certificate. Suitable for fineness determination of 15 to 40 μm slurry.

Professional instrument for testing the anti-perforation performance of PVC waterproof membrane, in line with the standard GB12952, the scale length of the metal catheter is 500mm, the Graduation is 10mm, the weight of the heavy hammer is 500g +/- 1g, and the diameter of the steel ball at the end of the punch rod is 12.7mm.

Preparative putty film and thick paint film, Moulding thickness 1 +/- 0.05, 0.7 +/- 0.035, 0.5 +/- 0.03, in line with the standard GB1727-79 "general preparation method of paint film".

Pencil Hardness Tester, load weight can be stacked, equilibrating weight adjustable, using high-precision motor, precision screw and imported bearings as the transmission mechanism, accurate operation.

ISO1524 single-channe Fineness of Ground Gauge, stainless steel, range 0~100μm, scale unit μm, Graduation 10μm, with third-party Measurement certificate. Suitable for fineness determination of 40~90 micron slurry.

ISO1524 single-channe Fineness of Ground Gauge, stainless steel, scale range 0~25μm, scale unit μm, Graduation 2.5µm, with third-party Measurement certificate. Suitable for fineness determination of 5~ 15 micron slurry.

ISO double-channel Fineness of Ground Gauge, range 0~100 μm, scale unit μm, Graduation 10 µm, scraper material stainless steel, Applicable standard ISO1524-1983 (E).

DM-IV Putty Abradability Tester is a new type of instrument designed and manufactured according to GB/T1770-2008 national standard, which is used to evaluate the sanding resistance of undercoating and putty.

ISO1524 single-channe Fineness of Ground Gauge, stainless steel, range 50-150 μm, scale unit μm, Graduation 10 µm, with third-party Measurement certificate. Suitable for fineness determination of 60-140 μm slurry.

Device for measuring solvent wiping resistance of coatings, the number of wipes can be read directly by the display screen, according to the number of wipes required for coating damage (arbitrarily set the number of wipes and Rotation speed), the solvent resistance of the coating can be evaluated Wipe performance.

Persoz swing rod mass 500 +/- 0.1g, swing rod period 1 +/- 0.001S, swing time on flat Glass ≥ 420S, start and finish swing angle 12 °/4 °

Test plate size 75mm × 150mm × 0.03mm-3mm, indentation diameter 20mm, indentation maximum 18mm, indentation accuracy 0.01mm, digital Graduation 0.01mm, punch maximum stroke 18mm, indentation speed 0.1-0 mm/s adjustable.

Lifting 110mm, table movement 80mm, traverse speed 254mm/min, counterweight weight 5kg8 pieces, 2kg2 pieces, 1kg1 pieces, scribing parts 5kg, scribing specifications, carbide swirl/spin file L0616M06 (GB9217), scribing lift stroke 75mm,

Using touch screen control counting and peristaltic pump water supply technology, the brush weight is 450g, the running frequency is 37 times/min, and the reciprocating Travel is 300mm, which can replace the brush body and maintain a constant pressure, which is suitable for a variety of surface performance tests.

The ISO Flow Cup designed bracket is used to stabilize and fix the Flow Cup, ensuring the accuracy of the outflow time test.

Measurement range 0~1250um or 0~50mil, indication accuracy +/- [( 1%~ 3%) H + 1um], the minimum measurement curvature convex radius: 5mm, using a magnetic and eddy current thickness measurement method, nondestructive measurement magnetic metal substrate nonmagnetic thickness of the coating layer and the thickness of the nonconductive coating layer on the nonmagnetic metal substrate.

Measurement range 0~1000μm, resolution 1μm, in line with GB/T1764-79, GB/T134522-92, ISO 2808-74 and other standards, widely used in the determination of paints dry-film thickness.