LICHEN

Test point 100μl/500μl/1000μl, error accuracy +/- 0.6 0 %/ +/- 0.7 0 %/ +/- 2.00%, manual single channel adjustable, the whole high temperature and high Voltage disinfection, with supporting simple bracket.

Pipette rod can be 360 swirl/spin, test point 50 μl, 25 μl, 5 μl, increment 0.5 μl, half sterilization, high-precision, can be removed 121 ℃ high temperature sterilization.

Using 20mm thick isostatic graphite plate surface, heating uniform corrosion resistance; PID temperature control accuracy +/- 1 ℃, with over-temperature alarm and timing function; closed structure design, safe and reliable operation.

12 Sample Handling, LED digital tube display, temperature control RT + 5~ 150 ℃, independent valve, independent blow pipe, metal aluminum module heating, manual adjustment of distribution chamber height.

Imported air-cooled fully enclosed compressor, with water pressure/temperature protection, 500W Power, LED digital tube display, temperature control -20 ℃~ room temperature, tank volume 4.9L.

Anti-atomization vacuum tank design, working area size 210 × 120 × 138mm, the extraction column is evenly distributed, and can withstand high negative pressure above -0.098Mpa.

Temperature control room temperature -100 ℃, 24-bit Sample Handling, PID temperature control, independent valve, independent blowpipe, 316 stainless steel material, manually adjust the height of the distribution chamber.

12, LED digital tube display, independent valve, independent blowpipe, purge device can be 360 ° swirl/spin, Water Bath heating room temperature~ 100 ℃, can achieve over-temperature alarm.

Adopt 6mm thick imported microcrystalline Glass plate surface, heating uniform corrosion resistance; PID temperature control accuracy +/- 1 ℃, with over-temperature alarm and timing function; closed structure with special heat insulation design, safe and reliable operation.

LED digital tube/ammeter display, can be timed, Kjeldahl nitrogen method, Power 800W, nitrogen content 0.02-98%, hand-in-hand, lined with ABS anti-corrosion board, steam water source tap water.

Using 20mm thick isostatic graphite plate surface, heating uniform corrosion resistance, PID temperature control accuracy +/- 1 ℃, closed structure design operation safety, with over-temperature alarm and timing function.

Temperature control < -80 ℃, imported compressor from Europe, lyophilized area of 0.12 square meters, equipped with anti-return oil Vacuum Pump, LCD touch screen, cold trap with pre-freezing function.

Can handle 1 to 12 samples, 7-inch LCD touch screen display, automatic water intake, water replenishment, bandwidth evaluation sensitivity, ten-level adjustable, temperature control RT-100 ℃.

12 stations, automatic air-cooled, LCD liquid crystal display, with temperature deviation Adjustment, automatic fault detection, multiple heat sinks, independent valves, independent blowpipe.

Anti-atomization vacuum tank design, the size of the working area is Ø 180 × 138mm, the extraction column is evenly distributed, and it can withstand high negative pressure above -0.098Mpa.

Detect K, Na, Li, Ba, using polyline method, linear method, Linear dispersion method calibration, one key automatic ignition, with RS232 interface, with correlation coefficient automatic calculation function.

Temperature control < -80 ℃, imported compressor from Europe, lyophilized area 0.094 m2, equipped with anti-return oil Vacuum Pump, LCD touch screen, cold trap with pre-freezing function.

Extrusion crushing type, can crush various brittle materials with strength less than 250MPa, feed port size 100 × 100mm, discharge particle size 1-25mm.

Measurement range 1.0-10 ml/g, the use of organic Glass material, is the determination of residual chlorine in drinking water after the amount of residual ammonia (also known as residual chlorine) Colorimetric Measurement tool.

Test point 5μl/25μl/50μl, error accuracy +/- 0.6 0 %/ +/- 0.9 0 %/ +/- 2.00%, manual single channel adjustable, the whole high temperature and high Voltage disinfection, with supporting simple bracket.

The kettle body is made of non-magnetic 304 stainless steel, the lining is made of polytetrafluoroethylene, the capacity is 400ml, the lining specification is Φ81 × 138mm, and the corrosion resistance is good.

Vertical, temperature control < -60 ℃, European imported compressor, lyophilized area of 0.092 m2, equipped with anti-return oil Vacuum Pump, built-in heat exchanger, cold trap with pre-freezing function, cold trap size φ 240mm × 260mm.

Kjeldahl nitrogen determination method, Power 800W, nitrogen content 0.02-98%, self-integrated, lined with ABS anti-corrosion board, steam source purified water or distillation water.

Anti-atomization vacuum tank design, the working area size is Ø 220 × 138mm, the extraction column is evenly distributed, and can withstand high negative pressure above -0.098Mpa.

Vertical, temperature control < -60 ℃, European imported compressor, lyophilized area of 0.12 square meters, 8 manifolds, with anti-return Vacuum Pump, built-in heat exchanger, cold trap with pre-freezing function, cold trap size φ 240mm × 260mm.

Vertical, temperature control < -80 ℃, European imported compressor, with anti-return oil Vacuum Pump, built-in heat exchanger, cold trap with pre-freezing function, can display temperature, vacuum degree, Linear dispersion browsing.

Detection of K, Na, Ba, using polyline method, straight line method calibration, one-button automatic ignition, with RS232 interface, with correlation coefficient automatic calculation function.

European original imported compressor, equipped with anti-return oil Vacuum Pump, with pre-freezing function, lyophilized area of 0.092 square meters, cold trap size φ 240mm × 170mm, with 3-layer rack.

Kjeldahl nitrogen determination method, ammeter display, Power 800W, nitrogen content 0.02-98%, hand-integrated, lined with ABS anti-corrosion board, steam source tap water.

Pipette rod can be 360 swirl/spin, test point 200 μl, 100 μl, 20 μl, increment 1 μl, half disinfection, high-precision, can be removed 121 ℃ high temperature sterilized.

The heat collection heating method is used to heat the reactants evenly, the PID temperature control accuracy is +/- 1 ℃, the Speed range is adjustable from 0-2400rpm, and the DC permanent magnet motor runs smoothly and has low noise.

Weighing range 0.005-320 (g), weighing accuracy 0.005 (g), density Measurement range ≥ 1, ≤ 1 (g/cm3), density Measurement accuracy 0.001 (g/cm3), density frame material plastic, measurement Stabilization time ≤ 3 (s)

The double suction pump head is designed to work alone or simultaneously, and is equipped with a double vacuum meter to visually display the vacuum degree. Using corrosion-resistant materials and ABS engineering plastic housing, the turbine duct structure ensures a 60L/min Flow rate, and the whole machine is only 7.5kg. Lightweight and portable.

Using aluminum alloy Teflon coating liner, corrosion resistance and good thermal conductivity. PID temperature control technology ensures that the temperature is accurate to +/- 1 ℃, Speed range 0-2200rpm, suitable for various experimental needs.

Adopt PID temperature control technology implementation +/- 1 ℃ accuracy, equipped with magnetic Stir to ensure temperature uniformity ≤ 1 ℃, stainless steel liner high temperature sealing, support 99 hours timing and anti-dry burning protection function.

Double suction pump head can work alone or at the same time, equipped with vacuum meter real-time monitoring. Using corrosion-resistant materials and ABS engineering plastic shell, the turbine duct structure guarantees 90L/min Flow rate, and the whole machine is only 8kg lightweight and portable.

The cold-rolled steel shell electrostatic spraying process is used to resist corrosion and aging; the 201 stainless steel plate surface has no deformation at high temperature and bears 50kg; the PID temperature control accuracy is +/- 1 ℃, and the closed heating thermal efficiency is high.

The double air pump head can work alone or at the same time, and is equipped with a vacuum meter to visually display the vacuum degree. The shell is formed with ABS engineering plastic at one time, and the structure is beautiful and durable. The maximum vacuum degree is 0.098MPa, and the Flow rate is 60L/min.

Adopting high-quality stainless steel liner and PID temperature control technology, the temperature control accuracy reaches +/- 1 ℃, Temperature uniformity ≤ 1 ℃. Equipped with magnetic Stir and anti-dry burning function to ensure the safety and reliability of the experiment.

Adopt stainless steel liner and PID temperature control technology, temperature control accuracy of +/- 1 ℃, equipped with anti-dry burning protection and double hole design, support 99 hours timing function, ensure experimental safety and temperature stability.