LICHEN

4.3 inch TFT touch screen, 1.5-150W adjustable, standard 6mm horn, detachable acrylic large window, lifting sample stage, with Frequency automatic tracking, automatic fault alarm function.

PID temperature control technology implementation +/- 0.2 ℃ accuracy, DC brushless motor noise low maintenance-free, nano Pottery and porcelain heating table wear and corrosion resistance, can be set up 100 program control to adapt to different material needs.

4.3 inch TFT touch screen, 2.5-250W adjustable, standard 6mm horn, detachable acrylic large window, lifting sample stage, with Frequency automatic tracking, automatic fault alarm function.

LCD display, can be timed, Kjeldahl nitrogen method, Power 1.2KW, nitrogen content 0.02-98%, hand-integrated, lined with ABS anti-corrosion board, steam source purified water or distillation water.

Touch screen, Power 18-1800W adjustable, with 22mm horn, can display horn, Power ratio, ultrasonic time, detachable acrylic large window, lifting sample stage.

The kettle body is made of non-magnetic 304 stainless steel, the lining is made of polytetrafluoroethylene, the capacity is 250ml, the lining specification is 65 × 135mm, and the corrosion resistance is good.

24 stations, automatic air-cooled, LCD liquid crystal display, with temperature deviation Adjustment, automatic fault detection, multiple heat sinks, independent valves, independent blowpipe.

Test point 2μl/10μl/20μl, error accuracy +/- 0.9 0 %/ +/- 1.20 %/ +/- 3.00%, manual single channel adjustable, the whole high temperature and high Voltage disinfection, with supporting simple bracket.

Using 6mm thick German Microcrystalline Glass plate surface, uniform heating and corrosion resistance; PID temperature control technology accuracy of +/- 1 ℃, with over-temperature alarm and electronic lock function, safe and reliable and high thermal efficiency.

LED digital display, Kjeldahl nitrogen method, Power 1.2KW, nitrogen content 0.02-98%, self-contained, lined with ABS anti-corrosion board, steam source purified water or distillation water.

The kettle body is made of non-magnetic 304 stainless steel, the inner lining is made of polytetrafluoroethylene, the capacity is 25ml, the inner lining specification is Φ33 × 61, and the corrosion resistance is good.

The kettle body is made of non-magnetic 304 stainless steel, the lining is made of polytetrafluoroethylene, the capacity is 150ml, the lining specification is 58 × 114mm, and the corrosion resistance is good.

Using 20mm thick isostatic graphite plate, corrosion resistance and uniform heating; PID temperature control accuracy +/- 1 ℃, with over-temperature alarm and timing function; closed structure design to ensure safe operation.

Detect K, Na, Ca, using polyline method, straight line method, Linear dispersion method calibration, one key automatic ignition, with RS232 interface, with correlation coefficient automatic calculation function.

Touch screen, Power 6.5-650W adjustable, with 6mm horn, can display horn, Power ratio, ultrasonic time, detachable acrylic large window, lifting sample stage.

Measurement range 0.05-1 ml/g, using organic Glass material, is the determination of residual chlorine in drinking water after the amount of residual ammonia (also known as residual chlorine) Colorimetric Measurement tool.

LED digital tube display, 12-bit Sample Handling, purge device can be 360 ° swirl/spin, Water Bath heating, Temperature range -100 ℃, and solution contact parts are made of 316 stainless steel.

Vertical, temperature control < -60 ℃, imported compressor from Europe, lyophilized area 0.092 m2, 8 multi-manifold tubes, equipped with anti-return Vacuum Pump, built-in heat exchanger, cold trap with pre-freezing function, cold trap size φ 240mm × 260mm.

Test point 1000μl/2500μl/5000μl, error accuracy +/- 0.5 0 %/ +/- 0.6 0 %/ +/- 0.70%, manual single channel adjustable, the whole high temperature and high Voltage disinfection, with supporting simple bracket.

Anti-atomization vacuum tank design, working area size 210 × 100 × 138mm, the extraction column is evenly distributed, and can withstand high negative pressure above -0.098Mpa.

Test point 1μl/5μl/10μl, error accuracy +/- 1.00 %/ +/- 1.50 %/ +/- 2.50%, manual single channel adjustable, the whole high temperature and high Voltage disinfection, with supporting simple bracket.

Feed particle size < 70mm, high manganese steel hammer, full sealing design, no dust pollution, can crush Moisture content of the sample, suitable for coal, electricity, chemical industry, building materials, geological exploration.

Can handle 1 to 60 samples, 7-inch LCD touch screen display, automatic water intake, replenishment, each channel is controlled by an independent solenoid valve, temperature control RT-100 ℃.

Vertical, temperature control < -80 ℃, European imported compressor, with anti-return oil Vacuum Pump, built-in heat exchanger, cold trap with pre-freezing function, can display temperature, vacuum degree, Linear dispersion browsing.

Detect K, Na, using polyline method, linear method, Linear dispersion method calibration, one key automatic ignition, with RS232 interface, with correlation coefficient automatic calculation function.

European original imported compressor, equipped with anti-return oil Vacuum Pump, with pre-freezing function, lyophilized area of 0.092 square meters, with 8 manifolds, cold trap size φ 240mm × 170mm, with 4 layers of shelves.

Touch screen, Power 12-1200W adjustable, with 20mm horn, can display horn, Power ratio, ultrasonic time, detachable acrylic large window, lifting sample stage.

Extrusion crushing type, can crush various brittle materials with strength less than 250MPa, feed port size 100 × 60mm, discharge particle size 0.1-15mm.

Test point 10μl/50μl/100μl, error accuracy +/- 0.8 0 %/ +/- 1.00 %/ +/- 3.00%, manual single channel adjustable, the whole high temperature and high Voltage disinfection, with supporting simple bracket.

High-performance corrosion-resistant parts, bottom heating, with timing alarm function, LED digital tube display, can be measured at the same time up to 6/times.

Feed particle size < 80mm, high manganese steel hammer, full sealing design, no dust pollution, can crush Moisture content of the sample, suitable for coal, electricity, chemical industry, building materials, geological exploration.

Temperature control < -80 ℃, imported compressor from Europe, lyophilized area 0.094 m2, standard 8 multi-manifold, with anti-return Vacuum Pump, LCD touch screen, cold trap with pre-freezing function.

LED digital tube display, stirring volume 60L, using DC permanent magnet motor, stirring volume of 20000mPa·s, using open frame, suitable for a variety of containers, overload automatic stop.

12L volume 304 stainless steel inner box, microcomputer control, LCD liquid crystal display, three pulsating vacuum, full opening safety valve, with drying function, can improve the humidity of the surface of sterilized items.

Extrusion crushing type, can crush various brittle materials with strength less than 250MPa, feed port size 100 × 125mm, discharge particle size 2-35mm.

Temperature control room temperature -100 ℃, 12 Sample Handling, PID temperature control, independent valve, independent blowpipe, 316 stainless steel material, manually adjust the height of the distribution chamber.

24-Bit, LED digital tube display, independent valve, independent blowpipe, purge device can be 360 ° swirl/spin, Water Bath heating room temperature~ 100 ℃, can achieve over-temperature alarm.

Temperature control < -80 ℃, imported compressor from Europe, lyophilized area of 0.12 square meters, equipped with anti-return oil Vacuum Pump, LCD touch screen, cold trap with pre-freezing function.

Feed particle size < 80mm, high manganese steel hammer, full sealing design, no dust pollution, can crush Moisture content of the sample, suitable for coal, electricity, chemical industry, building materials, geological exploration.

Detect K, Na, using polyline method, straight line method calibration, one key automatic ignition, with RS232 interface, with correlation coefficient automatic calculation function.