LICHEN

Strong cantilever Overhead Stirrer, no digital display, 120W Power, stirring torque up to 1850g · cm, using open rack, suitable for a variety of containers.

Display salinity, sodium content, temperature, range 0.01% -10.00%, nickel-free platinum Eletroplating electrode, automatic shutdown.

The kettle body is made of non-magnetic 304 stainless steel, the lining is made of polytetrafluoroethylene, the capacity is 200ml, the lining specification is Φ63 × 135mm, and the corrosion resistance is good.

Pipette rod can be 360 swirl/spin, test point 10 μl, 5 μl, 1 μl, increment 0.1 μl, half sterilization, high-precision, can be removed 121 ℃ high temperature sterilization.

Pipette rod can be 360 swirl/spin, test point 20 μl, 10 μl, 2 μl, increment 0.5 μl, half-branch sterilization, high-precision, can be removed 121 ℃ high temperature sterilization.

24 Sample Handling, LED digital tube display, temperature control RT + 5~ 150 ℃, independent valve, independent blow pipe, metal aluminum module heating, manual adjustment of distribution chamber height.

Range 0.005-600g, accuracy 0.001g/cm ³, using German HBM Sensors, with temperature and solution compensation functions, built-in battery.

Adopt DC permanent magnet motor to achieve accurate speed regulation of 100-2000rpm, support 30000mPa · s high viscosity liquid treatment, and integrate overload, over-current and over-temperature protection to ensure safe operation.

Test point 0.25μl/1.25μl/2.5μl, error accuracy +/- 2.5 0 %/ +/- 3.00 %/ +/- 1 2.00%, manual single channel adjustable, the whole high temperature and high Voltage disinfection, with supporting simple bracket.

The isostatic graphite plate surface is resistant to acid and alkali corrosion, and there is no warping deformation at high temperature; PID temperature control accuracy +/- 1 ℃, closed heating is safe and reliable; it has its own electronic lock and self-tuning function to ensure operation safety and temperature stability.

LED digital tube display, 24-bit Sample Handling, purge device can be 360 ° swirl/spin, Water Bath heating, Temperature range -100 ℃, and solution contact parts are made of 316 stainless steel.

Vertical, temperature control < -60 ℃, European imported compressor, lyophilized area of 0.12 square meters, equipped with anti-return oil Vacuum Pump, built-in heat exchanger, cold trap with pre-freezing function, cold trap size φ 240mm × 260mm.

Adopt DC permanent magnet motor to achieve low noise and smooth operation, speed control accuracy +/- 10rpm, maximum processing viscosity 20000mPa · s, with triple safety protection system.

18L volume 304 stainless steel inner box, microcomputer control, LCD liquid crystal display, three pulsating vacuum, full opening safety valve, with drying function, can improve the humidity of the surface of sterilized items.

Stir volume 8L, LED digital tube, speed 100-3000rpm, Stir Viscosity 10000mPa·s, open rack, suitable for a variety of containers.

Touch screen, Power 10-1000W adjustable, with 6mm horn, can display horn, Power ratio, ultrasonic time, detachable acrylic large window, lifting sample stage.

Display salinity, sodium content, temperature, range 0.01% -26.00%, nickel-free platinum Eletroplating electrode, automatic shutdown timing.

Powerful cantilever Overhead Stirrer, LED digital tube display, 120W power, Stir torque up to 1850g · cm, using open rack, suitable for a variety of containers.

4.3 inch TFT touch screen, 6.5-650W adjustable, standard 6mm horn, detachable acrylic large window, lifting sample stage, with Frequency automatic tracking, automatic fault alarm function.

Permanent magnet motor, speed range 100-2000rpm, Max. stirring Capacity 60L, recommended Stir amount 15L, Stir maximum Viscosity 30000mPa·s, lifting stroke 300-600mm

Display salinity, sodium content, temperature, range 0.01% -5.00%, nickel-free platinum Eletroplating electrode, automatic shutdown.

8L volume 304 stainless steel inner box, microcomputer control, LCD liquid crystal display, three pulsating vacuum, full opening safety valve, with drying function, can improve the moisture level of the surface of sterilized items.

Pipette rod can be 360 swirl/spin, test point 5000 μl, 2500 μl, 1000 μl, increment 50 μl, half sterilization, high-precision, can be removed 121 ℃ high temperature sterilized.

Pipette rod can be 360 swirl/spin, test point 10ml, 5ml, 1ml, increment 0.1ml, half disinfection, high-precision, can be removed 121 ℃ high temperature sterilized.

Imported graphite panel, heating size 300 × 200mm, PID temperature control technology, Temperature range 50-500 ℃, with timing, over-temperature alarm, automatic error correction and other functions.

Using 6mm thick German Microcrystalline Glass plate, corrosion resistance and uniform heating; PID temperature control technology accuracy of +/- 1 ℃, with over-temperature alarm and power-down memory function, safe and reliable.

The heat collection heating method is used for fast and uniform heating speed, PID temperature control accuracy +/- 1 ℃, Speed range 0-2200rpm can meet different experimental needs. External electric heating tube design is easy to clean and maintain.

Test point 20μl/100μl/200μl, error accuracy +/- 0.6 0 %/ +/- 0.8 0 %/ +/- 2.50%, manual single channel adjustable, the whole high temperature and high Voltage disinfection, with supporting simple bracket.

Vertical, temperature control < -80 ℃, European imported compressor, with anti-return oil Vacuum Pump, built-in heat exchanger, cold trap with pre-freezing function, can display temperature, vacuum degree, Linear dispersion browsing.

4.3-Inch color LCD touch screen, using ultra-low temperature drift characteristic electronic components, automatic water filling, no need to adjust water temperature, real-time chill down correction, support 1000 data storage.

Pipette rod can be 360 swirl/spin, test point 2.5 μl, 1.25 μl, 0.25 μl, increment 0.05 μl, half sterilized, high-precision.

Brushless motor, LCD liquid crystal display, can adjust Rotation speed, time, can choose to run regularly or continuously, tray with anti-skid pad.

The kettle body is made of non-magnetic 304 stainless steel, the inner lining is made of polytetrafluoroethylene, the capacity is 500ml, the inner lining specification is Φ91 × 138mm, and the corrosion resistance is good.

Vertical, temperature control < -80 ℃, European imported compressor, with anti-return oil Vacuum Pump, built-in heat exchanger, cold trap with pre-freezing function, can display temperature, vacuum degree, Linear dispersion browsing.

Detect K, Na, Li, Ca, using polyline method, linear method, Linear dispersion method calibration, one key automatic ignition, with RS232 interface, with correlation coefficient automatic calculation function.

Adopt PID temperature control technology, Temperature range RT + 10-300 ℃, temperature control accuracy +/- 1 ℃. Stainless steel pot body Teflon coating, high temperature corrosion resistance, external heating tube is easy to clean.

Six-hole design is suitable for a variety of containers, PID temperature control accuracy of +/- 1 ℃, with anti-dry burning protection and 99 hours timing function, built-in drain pipe for easy operation, Temperature uniformity ≤ 1 ℃ to ensure experimental stability.

The kettle body is made of non-magnetic 304 stainless steel, the inner lining is made of polytetrafluoroethylene, the capacity is 300ml, the inner lining specification is Φ71 × 138mm, and the corrosion resistance is good.

4.3 inch TFT touch screen, 1.5-150W adjustable, standard 6mm horn, detachable acrylic large window, lifting sample stage, with Frequency automatic tracking, automatic fault alarm function.

PID temperature control technology implementation +/- 0.2 ℃ accuracy, DC brushless motor noise low maintenance-free, nano Pottery and porcelain heating table wear and corrosion resistance, can be set up 100 program control to adapt to different material needs.