Mayer Rod

Wire-wound, wet film thickness 12 μm, Total length 240mm, application width 200mm, hand width 20 + 20mm, material stainless steel.

Wire-wound, wet film thickness 100μm, application width 200mm, material stainless steel.

Wire-wound, wet film thickness 15μm, Total length 240mm, application width 200mm, hand width 20 + 20mm, material stainless steel.

Wire-wound, wet film thickness 40μm, Total length 240mm, application width 200mm, hand width 20 + 20mm, material stainless steel.

Wire-wound, wet film thickness 30μm, Total length 240mm, application width 200mm.

Wire-wound, wet film thickness 60μm, Total length 240mm, application width 200mm, hand width 20 + 20mm, material stainless steel.

Wire-wound stainless steel wire-wound drawdown Bar, also known as steel wire coating rod, can be prepared 50μm wet-film, the Total length of the wire rod is 240mm, and the effective application width is 20mm.

Wire-wound, wet film thickness 150μm, Total length 240mm, application width 200mm, hand width 20 + 20mm, material stainless steel.

The Total length of the wire rod is 240mm, the application width is 200mm, and it can be prepared for 80μm wet film thickness coating, which is suitable for laboratory film preparatory specific samples.

Wire-wound, wet film thickness 20μm, Total length 240mm, application width 200mm, hand width 20 + 20mm, material stainless steel.

Wire-wound, wet film thickness 120μm, Total length 240mm, application width 200mm, hand width 20 + 20mm, material stainless steel.

Wire-wound, wet film thickness 200μm, Total length 240mm, application width 200mm, hand width 20 + 20mm, material stainless steel.

Wire-wound, wet film thickness 25μm, Total length 240mm, application width 200mm, hand width 20 + 20mm, material stainless steel.

Wire-wound, wet film thickness 50μm, Total length 400mm, application width 300mm, hand width 50 + 50mm, material stainless steel.

Wire-wound, wet film thickness 80μm, Total length 400mm, application width 300mm, hand width 50 + 50mm, material stainless steel.

Wire-wound, wet film thickness 60μm, Total length 400mm, application width 300mm, hand width 50 + 50mm, material stainless steel.

Wire-wound wire rods can be prepared with a wet film thickness of 25 microns, a Total length of 400, and an effective application width of 300mm.

Proofing rod can be prepative 30 micron wet film thickness, Total length 400mm, application width 300mm, hand width 50 + 50mm, stainless steel material.

Wire-wound Proofing rod can be prepared with a wet film thickness of 20 microns, the Total length of steel wire Applicator rod is 400, and the effective application width is 300mm.

Wire-wound Spreader roller can be prepared with a wet film thickness of 200 microns, a Total length of 400, and an effective application width of 300mm.

Wire-wound Proofing rod can be prepared 40 micron wet film thickness, the Total length is 400, the effective application width is 300mm.

Wire-wound, wet film thickness 120μm, Total length 400mm, application width 300mm, hand width 50 + 50mm, material stainless steel.

Wire-wound, wet film thickness 100μm, Total length 400mm, application width 300mm, hand width 50 + 50mm, material stainless steel.

Wire-wound coating bar can be prepared 150 micron wet film thickness, the Total length is 400, the effective application width is 300mm.

Wire-wound stainless steel wire rod can be prepared with 15 micron wet film thickness, the Total length is 400mm, and the effective application width is 300mm.