Mayer Rod

The production process is formed, the wet film thickness is 60μm, the diameter is 10mm, the Total length is 250mm, the application width is 250mm, the grip width is 0, and the material is 304 stainless steel.

The production process is formed, the wet film thickness is 100μm, the diameter is 10mm, the Total length is 250mm, the application width is 250mm, the grip width is 0, and the material is 304 stainless steel.

Formed hand-coated wire rod, film thickness 100μm, diameter 10mm, application width 300mm, hand width 50 + 50mm, suitable for thick film scraping.

Formed, wet film thickness 60μm, diameter 10mm, Total length 60mm, application width 60mm, grip width 0, material 304 stainless steel.

Formed, wet film thickness 100μm, diameter 10mm, Total length 60mm, application width 60mm, grip width 0, material 304 stainless steel.

Formed, wet film thickness 52μm, diameter 10mm, Total length 60mm, application width 60mm, grip width 0, material 304 stainless steel.

Formed, wet film thickness 80μm, diameter 10mm, Total length 60mm, application width 60mm, grip width 0, material 304 stainless steel.

The film thickness is 80μm, the length is 60mm, and the bottom is a K-shaped cogging, which is suitable for customers with higher glue viscosity, such as silk, non-woven fabrics, etc.

Formed, WFT 96μm, diameter 10mm, Total length 250mm, application width 250mm, grip width 0, material 304 stainless steel

Formed, WFT 92μm, diameter 10mm, Total length 250mm, application width 250mm, grip width 0, material 304 stainless steel

The production process is formed, the wet film thickness is 80μm, the diameter is 10mm, the Total length is 250mm, the application width is 250mm, the grip width is 0, and the material is 304 stainless steel.

The production process is formed, the wet film thickness is 52μm, the diameter is 10mm, the Total length is 250mm, the application width is 250mm, the grip width is 0, and the material is 304 stainless steel.

Formed, WFT 70μm, diameter 10mm, Total length 250mm, application width 250mm, grip width 0, material 304 stainless steel

Formed, WFT 64μm, diameter 10mm, Total length 400mm, application width 300mm, grip width 0, material 304 stainless steel

Formed, WFT 64μm, diameter 10mm, Total length 250mm, application width 250mm, grip width 0, material 304 stainless steel

Formed, WFT 76 μ m, diameter 10mm, Total length 250mm, application width 250mm, hand width 0, material 304 stainless steel

The film thickness is 80μm, the length is 250mm, and the bottom is a K-shaped cogging, which is suitable for customers with higher glue viscosity, such as silk, non-woven fabrics, etc.

Formed, WFT 70μm, diameter 10mm, Total length 400mm, application width 300mm, grip width 0, material 304 stainless steel

Spreader 80 micron thick wet-film, diameter 10mm, Total length 400mm, 60mm, 250mm, 300mm three application widths optional.

Japan imported scratch rod, Moulding thickness of 60μm, is a laboratory-specific manual film tool, OSP60 also has optional lengths including 60mm and 250mm.

Formed, WFT 92μm, diameter 10mm, Total length 400mm, application width 300mm, grip width 0, material 304 stainless steel

Formed coating bar, easy to clean and continuous wire advantages, the Total length of 400mm, wet film thickness of 52 microns, the width of the film is 300mm.

Formed, WFT 96μm, diameter 10mm, Total length 400mm, application width 300mm, grip width 0, material 304 stainless steel

The film thickness is 80μm, the length is 400mm, and the bottom is a K-shaped cogging, which is suitable for customers with higher glue viscosity, such as silk, non-woven fabrics, etc.

Formed, WFT 76μm, diameter 10mm, Total length 400mm, application width 300mm, hand width 0, material 304 stainless steel