Casting Knife Flim Applicator

Film thickness 50μm, application width 75mm, accuracy +/- 2um, with factory test report (imported coordinate detection), can stand Measurement, 9Cr18Mo stainless steel material.

The 4-sided structure integrates four kinds of film Film thickness, the accuracy is controlled at +/- 2μm, and the high hardness stainless steel material has a hardness of 50-55HRC, and supports 300mm wide sample preparation.

Wet film thickness 50μm, application width 50mm, film accuracy +/- 2um, with factory inspection report (imported three coordinate detection), can stand Measurement.

Two films thickness of 25μm, 50μm, using high carbon chromium wear-resistant stainless steel, application width 80mm, Total length 100mm, suitable for high viscosity samples Moulding.

Wet film thickness 50μm, Spreader width 100mm, accuracy +/- 2μm, widely used in Coating inks industry, Moulding uniform, high mass.

Wet film thickness 25μm, Spreader width 78mm, accuracy +/- 2μm, 9Cr18Mo high carbon chromium stainless steel material, with high hardness, corrosion resistance advantages.

Wet film thickness 50μm, Spreader width 78mm, accuracy +/- 2μm, using high carbon chromium stainless steel, in line with GB standards.

Wet film thickness 25μm, Spreader width 100mm, accuracy +/- 2μm, suitable for Coating, paints, inks and other industries Preparative specific Film thickness film.

Wet film thickness 50μm, Spreader width 160mm, accuracy +/- 3μm, material stainless steel, standard GB standard, type: single-sided GB Bird-type.

Film thickness 10, 20, 30, 40 μm, Application width 160mm, wear-resistant corrosion-resistant alloy steel.

Film thickness 5, 10, 15, 20 μm, Application width 160mm, wear-resistant corrosion-resistant alloy steel.

Single-sided Moulding, wet film thickness 30μm, wear-resistant and corrosion-resistant alloy steel material, effective Spreader width 100mm, support non-standard customization.

Single-sided Moulding, wet film thickness 37.5μm, made of wear-resistant and corrosion-resistant alloy steel, effective Spreader width 100mm, support non-standard customization.

Single-sided Moulding, wet film thickness 15μm, wear-resistant and corrosion-resistant alloy steel material, effective Spreader width 100mm, support non-standard customization.

Single-sided Moulding, wet film thickness 20μm, wear-resistant and corrosion-resistant alloy steel material, effective Spreader width 100mm, support non-standard customization.

Single-sided Moulding, wet film thickness 40μm, wear-resistant and corrosion-resistant alloy steel material, effective Spreader width 100mm, support non-standard customization.

Single-sided Moulding, wet film thickness 50μm, made of wear-resistant and corrosion-resistant alloy steel, effective Spreader width 100mm, support non-standard customization.

4-Sided Applicator, wet film thickness of 5, 10, 15, 20 μm, Application width of 80mm, using high-quality wear-resistant corrosion-resistant alloy steel.

4-Sided Applicator, wet film thickness of 10, 20, 30, 40μm, Application width of 80mm, using high-quality wear-resistant corrosion-resistant alloy steel.

4-Sided type, Film thickness 5/10/15/20μm, Spreader width 80mm, hard stainless steel material.

Single-sided Film Applicator, wet film thickness 25μm, Spreader width 100mm, material stainless steel, size 128mm.

Type: Cube, wet film thickness 75/150μm, Spreader width 12.7mm, accuracy +/- 2/3μm, material: 1Cr17N2 stainless steel, standard ASTMD 823.

4-Sided Spreader, film thickness of 5μm, 10μm, 15μm, 20μm, wear-resistant stainless steel material, application width of 150mm.

Single-sided, wet film thickness 50μm, Spreader width 100mm, material stainless steel, size 128mm.

Cube, Film thickness 38/76μm, Spreader width 12.7mm, accuracy +/- 2μm/+/- 3μm, 1Cr17N2 material.