Casting Knife Flim Applicator

Film thickness 50μm, application width 75mm, accuracy +/- 2um, with factory test report (imported coordinate detection), can stand Measurement, 9Cr18Mo stainless steel material.

Wet film thickness 125μm, Spreader width 78mm, accuracy +/- 4μm, material: 9Cr18Mo high carbon chromium stainless steel.

Film thickness 100μm, application width 75mm, accuracy +/- 2um, with factory test report (imported coordinate detection), can stand Measurement, 9Cr18Mo stainless steel material.

Film thickness 125μm, application width 75mm, accuracy +/- 2um, with factory test report (imported coordinate detection), can stand Measurement, 9Cr18Mo stainless steel material.

Wet film thickness 50μm, application width 50mm, film accuracy +/- 2um, with factory inspection report (imported three coordinate detection), can stand Measurement.

Wet film thickness 150μm, application width 50mm, film accuracy +/- 2um, with factory inspection report (imported three coordinate detection), can stand Measurement.

Film thickness 200μm, application width 75mm, accuracy +/- 2um, with factory test report (imported coordinate detection), can stand Measurement, 9Cr18Mo stainless steel material.

Film thickness 250μm, Spreader width 100mm, accuracy +/- 5μm, with good corrosion resistance and high hardness, in the Coating inks industry products are widely used.

Film thickness 150μm, application width 75mm, accuracy +/- 2um, with factory test report (imported coordinate detection), can stand Measurement, 9Cr18Mo stainless steel material.

Wet film thickness 200μm, application width 50mm, film accuracy +/- 2um, with factory inspection report (imported three coordinate detection), can stand Measurement.

Wet film thickness 75μm, application width 50mm, film accuracy +/- 2um, with factory inspection report (imported three coordinate detection), can stand Measurement.

Wet film thickness 175μm, application width 50mm, film accuracy +/- 2um, with factory inspection report (imported three coordinate detection), can stand Measurement.

Wet film thickness 100μm, application width 50mm, film accuracy +/- 2um, with factory inspection report (imported three coordinate detection), can stand Measurement.

Film thickness 75μm, application width 75mm, accuracy +/- 2um, with factory test report (imported coordinate detection), can stand Measurement, 9Cr18Mo stainless steel material.

Film thickness 175μm, application width 75mm, accuracy +/- 2um, with factory test report (imported coordinate detection), can stand Measurement, 9Cr18Mo stainless steel material.

Wet film thickness 125μm, application width 50mm, film accuracy +/- 2um, with factory inspection report (imported three coordinate detection), can stand Measurement.

Wet film thickness 600μm, Spreader width 160mm, accuracy +/- 10μm, material stainless steel, standard: GB standard, type single-sided GB Bird-type.

Single-sided Moulding, wet film thickness 60μm, made of wear-resistant and corrosion-resistant alloy steel, effective Spreader width 100mm, support non-standard customization.

Wet film thickness 1000μm, Spreader width 78mm, accuracy +/- 10μm, material stainless steel, GB standard, type single-sided GB Bird-type.

Single-sided Bird-type, Film thickness 100μm, Spreader width 78mm, accuracy +/- 3μm, 9Cr18Mo high carbon chromium stainless steel material.

Wet film thickness 150μm, Spreader width 78mm, accuracy +/- 4μm, using stainless steel material, high hardness, corrosion resistance.

Single-sided Bird-type, Film thickness 150μm, Spreader width 100mm, accuracy +/- 4μm, stainless steel material.

Wet film thickness 400μm, Spreader width 78mm, accuracy +/- 10μm, material stainless steel, standard GB standard, single-sided GB Bird-type.

Single-sided Bird-type, Film thickness 200μm, Spreader width 78mm, accuracy +/- 5μm, stainless steel material.

Wet film thickness 300μm, Spreader width 100mm, accuracy +/- 6μm, stainless steel material, in line with ISO standards, suitable for Paints, Coating and other industries to do film proofing.