Casting Knife Flim Applicator

4-sided film thickness 15μm, 30μm, 60μm, 90μm, application width 80mm, with factory test certificate, can be measured, using 9Cr18Mo wear-resistant stainless steel material.

Film thickness 50μm, application width 75mm, accuracy +/- 2um, with factory test report (imported coordinate detection), can stand Measurement, 9Cr18Mo stainless steel material.

4-sided film thickness 50μm, 100μm, 150μm, 200μm, application width 80mm, with factory test certificate, can be measured, using 9Cr18Mo wear-resistant stainless steel material.

Type 4-sided, wet film thickness 100/150/200/250μm, application width 80mm, material stainless steel.

Type 4-sided, wet film thickness 50/100/150/200μm, application width 80mm, material stainless steel.

Wet film thickness 125μm, Spreader width 78mm, accuracy +/- 4μm, material: 9Cr18Mo high carbon chromium stainless steel.

Application width 80mm, Total length 90mm, wet film thickness of 30μm, 60μm, 90μm, 120μm, 9Cr18Mo wear-resistant anti-corrosion stainless steel material, with factory test report, can be Measurement.

Film thickness 100μm, application width 75mm, accuracy +/- 2um, with factory test report (imported coordinate detection), can stand Measurement, 9Cr18Mo stainless steel material.

Application width 80mm, Total length 90mm, wet film thickness of 50μm, 100μm, 150μm, 200μm, 9Cr18Mo wear-resistant and anti-corrosion stainless steel material, with factory test report, can be Measurement

High Hardness stainless steel material, Hardness of 50~55HRC, accuracy control in +/- 2μm, smooth surface and support a variety of film thickness selection, can cooperate with Film Applicator to achieve automatic film scraping operation.

Film thickness 125μm, application width 75mm, accuracy +/- 2um, with factory test report (imported coordinate detection), can stand Measurement, 9Cr18Mo stainless steel material.

4-sided film thickness 100μm, 200μm, 300μm, 400μm, application width 80mm, with factory test certificate, can be measured, using 9Cr18Mo wear-resistant stainless steel material.

The thickness of the two films is 300μm and 400μm, using high carbon chromium wear-resistant stainless steel, the application width is 80mm, and the Total length is 100mm, which is suitable for Moulding of high viscosity samples.

The thickness of the two films is 100μm and 150μm, using high carbon chromium wear-resistant stainless steel, the application width is 80mm, and the Total length is 100mm, which is suitable for Moulding of high viscosity samples.

Film thickness 200μm, application width 75mm, accuracy +/- 2um, with factory test report (imported coordinate detection), can stand Measurement, 9Cr18Mo stainless steel material.

The thickness of the two films is 150μm and 175μm, using high carbon chromium wear-resistant stainless steel, the application width is 80mm, and the Total length is 100mm, which is suitable for Moulding of high viscosity samples.

Film thickness 150μm, application width 75mm, accuracy +/- 2um, with factory test report (imported coordinate detection), can stand Measurement, 9Cr18Mo stainless steel material.

Two films thickness of 25μm, 50μm, using high carbon chromium wear-resistant stainless steel, application width 80mm, Total length 100mm, suitable for high viscosity samples Moulding.

Film thickness 75μm, application width 75mm, accuracy +/- 2um, with factory test report (imported coordinate detection), can stand Measurement, 9Cr18Mo stainless steel material.

Two films thickness of 50μm, 75μm, using high carbon chromium wear-resistant stainless steel, application width 80mm, Total length 100mm, suitable for high viscosity samples Moulding.

4-sided film thickness 25μm, 50μm, 75μm, 100μm, application width 80mm, with factory test certificate, can be measured, using 9Cr18Mo wear-resistant stainless steel material.

Film thickness 175μm, application width 75mm, accuracy +/- 2um, with factory test report (imported coordinate detection), can stand Measurement, 9Cr18Mo stainless steel material.

The thickness of the two films is 200μm and 300μm, using high carbon chromium wear-resistant stainless steel, the application width is 80mm, and the Total length is 100mm, which is suitable for Moulding of high viscosity samples.

The thickness of the two films is 175μm and 200μm, using high carbon chromium wear-resistant stainless steel, the application width is 80mm, and the Total length is 100mm.

The thickness of the two films is 75μm and 100μm, using high carbon chromium wear-resistant stainless steel, the application width is 80mm, and the Total length is 100mm, which is suitable for Moulding of high viscosity samples.