Vacuumpump

Adopting low-noise design and precision machining, the noise is only 62dBA; equipped with a special gas ballast valve to prevent the pump oil from mixing and prolong the service life; equipped with an automatic double anti-return oil device.

Extraction speed: 30L/min, > 0.085 (150mbar), positive pressure: 40Psi, series: 1, motor power 180, size mm: 250 * 135 * 210, 8kg, < 50dB, function: positive and negative pressure dual-use type

Pumping speed 1L/S, intake diameter 20mm, automatic double anti-return oil safety device, with special design gas ballast valve to prevent pump oil from mixing.

Extraction speed: 30L/min, > 0.085 (150mbar), series: 1, motor power 160, size mm: 250 * 135 * 210, 7.5kg, < 50dB, function: negative pressure

Using imported corrosion-resistant rubber diaphragm, the noise is less than 50dBA, can work continuously for 24 hours, with positive and negative pressure dual-use function, pumping speed up to 30L/min.

Two-stage pump, 6-8mbar, 20L/min, interface 10mm, pump sheet material: PTFE, composite diaphragm material: HNBR + PTFE (non-standard products can be customized), < 55db, with vacuum regulating valve, with solid discharge valve, 1450rpm

220V, 1 (3.6) L/S (m3/h), partial pressure: ≤ 6 * 10- ², total pressure: ≤ 1.33, 1400r/min, φ 20mm outer diameter, KF-16, 0.7L

The ultimate pressure is 6x10 ^ -2Pa, the pumping rate is 2L/s, the diameter of the air inlet is φ 25mm, and the motor Power is 0.37Kw.

180W, 80L/min, head 10m, Vacuum Level: -0.098 (2Kpa), air extraction volume: 10L/min, number of air extraction heads 2, safety function, check valve, casing: plastic, water tank volume: 15L, water tank: PP, 11Kg, ◆ inner stainless steel: SHB-ⅲ A: jet, air extraction nozzle: 304 stainless steel material (with 2 rubbertubing, length 94cm short: 34cm)

180W, 80L/min, head 10m, vacuum degree: -0.098 (2Kpa), air extraction volume: 10L/min, number of air extraction heads 2, safety function, check valve, case: plastic, Water Tank volume: 15L, Water Tank: PP, 11Kg, ◆ Inner stainless steel: SHB-III A: jet, air extraction nozzle: 304 stainless steel (with 2 rubbertubing, length 94cm short: 34cm)

Two-stage pump, 6-8mbar, flow: 40L/min, interface 10mm, pump blade: PTFE, composite diaphragm: HNBR + PTFE (non-standard products can be customized), < 55db, with vacuum regulating valve, with solid discharge valve, 1450rpm

Maximum vacuum degree 0.8kg/cm ², maximum exhaust 10, positive pressure/negative pressure positive pressure, motor power 80w, vacuum, compression, dual-purpose Vacuumpump

Pumping rate 35L/min, vacuum pressure ≥ 0.75MPA, positive pressure/negative pressure, positive pressure, negative pressure, motor power 85w, vacuum, compression, dual-purpose Vacuumpump

Extraction speed: 60L/min, > 0.085 (150mbar), positive pressure: 40Psi, series: 2, motor power 180, size mm: 315 * 135 * 210, 10kg, < 50dB, function: positive and negative pressure dual-use type

Maximum vacuum degree 0.8kg/cm ² (about 0.08MPa, 12psi), maximum exhaust 10, positive pressure/negative pressure, positive pressure, negative pressure, motor power 80w, is vacuum, compression, dual-purpose Vacuumpump

250W, 80L/min, head 10m, maximum Vacuum Level 0.098 (2Kpa), single head pumping capacity 10L/min, number of pumping heads 4, safety function, counterflow check valve, housing plastic, water tank 18L, water tank material PP

Extraction speed: 60L/min, > 0.08 (200mbar), positive pressure: 40Psi, series: 2, motor power 160, size mm: 315 * 135 * 210, 10kg, < 50dB, function: positive and negative pressure dual-use type

Extraction speed: 30L/min, > 0.085 (150mbar), series: 1, motor power 180, size mm: 250 * 135 * 210, 7.5kg, < 50dB, function: negative pressure

Extraction speed: 30L/min, > 0.08 (200mbar), positive pressure: 40Psi, series: 1, motor power 160, size mm: 250 * 135 * 210, 8kg, < 50dB, function: positive and negative pressure dual-use type

Extraction speed: 30L/min, > 0.095 (50mbar), series: 2, motor power 180, size mm: 315 * 135 * 210, 10kg, < 50dB, function: negative pressure

PTFE pump head and coating diaphragm are used to resist strong corrosion gases; the two-stage pump design provides 20L/min pumping speed and 3~ 8mbar Ultimate Vacuum, and its own vacuum meter can adjust the pressure.

Extraction speed: 30L/min, > 0.095 (50mbar), series: 2, motor power 160, size mm: 315 * 135 * 210, 10kg, < 50dB, function: negative pressure

Pumping speed 1.2m ³/h (20L/min), ultimate vacuum degree ≤ 2mbar (0.0002Mpa), frequency conversion speed regulation rated 1400 Rotation speed, safety function dual value motor, pumping head 1, Rated power 80W.

Using imported corrosion-resistant rubber diaphragm, pumping speed 30L/min, noise less than 50 decibels, 24 hours of continuous work and simple maintenance, small size for easy operation.

Adopting imported corrosion-resistant rubber diaphragm, the pumping speed reaches 60L/min, the ultimate pressure is 0.085MPa, and the small size is only 315 × 135 × 210mm. It supports 24-hour continuous oil-free operation and the noise is less than 50dBA.