Vacuumpump

Adopting low-noise design and precision machining, the noise is only 63dBA; it is equipped with a special gas ballast valve to prevent the pump oil from mixing and prolong the service life; the pumping speed is up to 2L/S, and the ultimate pressure is as low as 6x10-1Pa.

Adopting low-noise design and precision machining, the noise is only 62dBA; equipped with a special gas ballast valve to prevent the pump oil from mixing and prolong the service life; equipped with an automatic double anti-return oil device.

With low noise design and precision machining, the noise is only 62dBA; equipped with special gas ballast valve to prevent pump oil from mixing and prolong service life. Pumping speed 0.5L/S, ultimate pressure ≤ 6x10-1Pa.

Using imported corrosion-resistant rubber diaphragm, the noise is less than 50dBA, can work continuously for 24 hours, with positive and negative pressure dual-use function, pumping speed up to 30L/min.

Equipped with gas ballast valve to prevent pump oil from mixing water, pumping speed 4L/S, Ultimate Vacuum ≤ 6x10-1Pa, can be adapted to a variety of interfaces, suitable for pumping gases containing steam, particles and so on.

Two-stage pump, 6-8mbar, 20L/min, interface 10mm, pump sheet material: PTFE, composite diaphragm material: HNBR + PTFE (non-standard products can be customized), < 55db, with vacuum regulating valve, with solid discharge valve, 1450rpm

220V, 4 (14.4) L/S (m3/h), partial pressure: ≤ 4 * 10- ², total pressure: ≤ 1, 1400r/min, φ 30mm outer diameter, KF-25, 1.2L

220V, 2 (7.2) L/S (m3/h), partial pressure: ≤ 6 * 10- ², total pressure: ≤ 1.33, 1400r/min, φ 30/12/14/16mm outer diameter, KF-25, 0.8L

220V, 1 (3.6) L/S (m3/h), partial pressure: ≤ 6 * 10- ², total pressure: ≤ 1.33, 1400r/min, φ 20mm outer diameter, KF-16, 0.7L

180W, 80L/min, head 10m, Vacuum Level: -0.098 (2Kpa), air extraction volume: 10L/min, number of air extraction heads 2, safety function, check valve, casing: plastic, water tank volume: 15L, water tank: PP, 11Kg, ◆ inner stainless steel: SHB-ⅲ A: jet, air extraction nozzle: 304 stainless steel material (with 2 rubbertubing, length 94cm short: 34cm)

180W, 80L/min, head 10m, vacuum degree: -0.098 (2Kpa), air extraction volume: 10L/min, number of air extraction heads 2, safety function, check valve, case: plastic, Water Tank volume: 15L, Water Tank: PP, 11Kg, ◆ Inner stainless steel: SHB-III A: jet, air extraction nozzle: 304 stainless steel (with 2 rubbertubing, length 94cm short: 34cm)

220V, 4 (14.4) L/S (m3/h), partial pressure: ≤ 6 * 10- ², total pressure: ≤ 1.33, 1400r/min, φ 30mm outer diameter, KF-25, 1L

Two-stage pump, 6-8mbar, flow: 40L/min, interface 10mm, pump blade: PTFE, composite diaphragm: HNBR + PTFE (non-standard products can be customized), < 55db, with vacuum regulating valve, with solid discharge valve, 1450rpm

Maximum vacuum degree 0.8kg/cm ², maximum exhaust 10, positive pressure/negative pressure positive pressure, motor power 80w, vacuum, compression, dual-purpose Vacuumpump

Adopting low-noise design and precision machining, the noise is only 64dBA; equipped with a special gas ballast valve to prevent pump oil from mixing and prolong service life; pumping speed is 4L/S, limit pressure is 0.006mbar, suitable for a variety of vacuum operations.

220V, 4 (14.4) L/S (m3/h), partial pressure: ≤ 6 * 10- ², total pressure: ≤ 1.33, 1400r/min, φ 30mm outer diameter, KF-25, 1L

Pumping rate 35L/min, vacuum pressure ≥ 0.75MPA, positive pressure/negative pressure, positive pressure, negative pressure, motor power 85w, vacuum, compression, dual-purpose Vacuumpump

220V, 6 (21.6) L/S (m3/h), partial pressure: ≤ 4 * 10- ², total pressure: ≤ 1, 1400r/min, φ 40mm outer diameter, KF-25, 2L

250W, 80L/min, head 10m, maximum Vacuum Level 0.098 (2Kpa), single head pumping capacity 10L/min, number of pumping heads 4, safety function, counterflow check valve, housing plastic, water tank 18L, water tank material PP

PTFE pump head and coating diaphragm are used to resist strong corrosion gases; the two-stage pump design provides 20L/min pumping speed and 3~ 8mbar Ultimate Vacuum, and its own vacuum meter can adjust the pressure.

Using imported corrosion-resistant rubber diaphragm, pumping speed 30L/min, noise less than 50 decibels, 24 hours of continuous work and simple maintenance, small size for easy operation.

Pumping speed 6L/S, ultimate pressure ≤ 6x10-1Pa, equipped with gas ballast valve to prevent pump oil from mixing, can be connected to a variety of interfaces and adapted to a variety of auxiliary equipment.

Adopting imported corrosion-resistant rubber diaphragm, the pumping speed reaches 60L/min, the ultimate pressure is 0.085MPa, and the small size is only 315 × 135 × 210mm. It supports 24-hour continuous oil-free operation and the noise is less than 50dBA.

Extraction rate 2 liters/sec Limit pressure 6 × 10 ^ -2 Pa, Rotation speed 1400 rpm, noise only 66 dB, compact and easy to install.

The pumping speed is 2L/S, the ultimate pressure is less than or equal to 6x10-1Pa, and the oil pump is used to force the oil inlet device, which can operate continuously.