Folding Endurance Tester

Touch screen operation, flexible circuit board flexural test, test station 1, 10~180 degree test angle, can set the speed, test times and motor reset.

It meets the requirements of standard BS-3144, JIB-K6545, QB1873, QB2288, QB2703, GB16799-2008, QB/T2706-2005 and other leather flexible inspection methods.

The zigzag angle (90 +/- 2) °, the speed (5 to 150) r/min can be adjusted, and the diameter of the zigzag shaft is 30mm, which can measure three outsoles simultaneously.

Driven by stepper motor, high-precision positioning is accurate, low noise, and can be used for a long time; programmed origin reset, no need to hand the fixture in place.

Measurement range (1~ 6 * 10) times, folding resistance 0~4.78, tension adjustment range 4.9N~ 14.7N, is the paper, Encasement, scientific research and product mass inspection and other industries and departments of the test equipment.

In line with ASTM D1052 standard, it is suitable for Rubber, sole, etc. to do torsion resistance test, test sole Film thickness 0.25″, rubber 1/2″~ 1/8″.

Using DC motor, the NBC-7200 has a zigzag angle of 90 ° and a zigzag speed of 60r/min.

GB/T 2679.5 standard, measuring the folding fatigue strength of paper and Cardboard, the instrument has the parameters contained in the standard test, conversion, adjustment, display, memory, printing, with data processing function, can directly obtain the statistical results of the data.

At the same time, it can test 3 soles 3pcs, fixture width 144mm, bending Frequency 0 times/min~ 155 times/min adjustable, bending angle 90 °, suitable for personal protective equipment safety shoes, protective shoes and professional shoes and other footwear outsole bending test.

Test load 4.91N, 9.81N, 14.72N; bending angle 135 ° +/- 2 °; sample size 15mm wide, about 250mm long, specially test the bending strength of paper and Cardboard

Inner and outer box material stainless steel #304, temperature range -30 ℃ + 100 ℃, with protection device thermal protection shutdown, leakage protection shutdown, over-temperature protection, overload protection and other functions.

Suitable for Rubber, sole, PU and other materials of right-angle bending test, the test piece by the machine after continuous expansion, bending, check its attenuation, damage and checking degree.

Zigzag angle (5 ° to 80 °) adjustable., Zigzag resistance rate 5 to 150) r/min adjustable (digital display), can test 4 finished shoes at the same time.

The zigzag angle (90 +/- 2) °, the speed can be switched between 60r/min and 100r/min, the diameter of the zigzag shaft is 10mm, and six outsoles or 12 test pieces can be measured.

Temperature range -40 ℃ + 150 ℃, control accuracy ± 0.3 ℃, temperature uniformity ± 2 ℃, refrigerant R404 environmentally friendly refrigerant, compressor original fully enclosed, compressor start delay 5min, counter LCD, 0~999,999