Nitrogen Evaporator

Aluminum block bathroom heat transfer uniform rapid temperature control, 12-hole independent blow pipe design to avoid cross-contamination, temperature control accuracy +/- 0.5 ℃, gas flow 0~15L/min adjustable.

RT + 5 ℃ -150 ℃, heating time: ≤ 15min (20 ℃ to 100 ℃), number of modules placed: 2, air needle length: 150mm, standard 2 HX07 modules

RT + 5 ℃ -150 ℃, heating time: ≤ 15min (20 ℃ to 100 ℃), air needle length: 150mm, number of placing modules: 1, standard 1 HX07 module

24-Bit Sample Handling, temperature control accuracy +/- 1 ℃, unique self-equilibrating suspension lifting system, each Gas flow rate can be adjusted individually, suitable for a variety of testtube specifications.

Aluminum block bathroom heat transfer uniformly, 24-hole independent blow pipe to avoid cross-contamination. Temperature control accuracy +/- 0.5 ℃, heating power 200W, Digital Temperature range RT + 5~ 150 ℃.

Flow rate can be independently controlled for each air needle. Temperature control accuracy reaches +/- 0.5 ℃. Module temperature difference at 40 ℃ is only +/- 0.3 ℃. 150mm long air needle is suitable for different containers.

24-Bit independent gas circuit design, Flow rate of each channel can be adjusted separately; PID temperature control technology, temperature control accuracy +/- 1 ℃, to meet the needs of different sample condensing; 316 stainless steel material corrosion resistance easy to clean.

12 samples are processed simultaneously, temperature control accuracy +/- 1 ℃, using 316 stainless steel material, gas path independent adjustment, suitable for a variety of experimental needs.

48 samples are processed simultaneously, temperature control accuracy +/- 1 ℃, using 316 stainless steel material, Gas flow rate can be adjusted separately, suitable for small quantities of multi-sample condensing.

36-Bit Sample Handling capability, temperature control accuracy +/- 1 ℃, self-equilibrating suspension lifting system and independent gas path adjustment function to meet different experimental needs

12 samples are processed simultaneously, temperature control accuracy +/- 1 ℃, 316 stainless steel material, Gas flow rate can be adjusted separately, suitable for 10~55mm testtube, to meet different experimental needs.

Timing/quantitative/evaporation mode, can condense 1~ 8 samples at the same time, sample volume ≤ 200mL (with 0.5mL & 1.0 quantitative scale); Water Bath capacity 8L; air pressure adjustment 0~ 0.4Mpa; temperature control room temperature to 90 ℃; temperature control accuracy +/- 0.5 ℃; Water Bath heating

Each purge needle can independently control Flow rate, air needle position adjustable, temperature control accuracy of +/- 0.5 ℃, suitable for 40~100 ℃ range, Heating time ≤ 30 minutes.

The 12-hole design can process multiple samples at the same time, the temperature control accuracy is up to +/- 0.5 ℃, and the nitrogen consumption can be adjusted to 330ml/min/sample by digital temperature control method to achieve rapid anaerobic condensation.

Simultaneous processing of 36 samples, standard with a heating block, digital temperature control, temperature control up to 150 ℃, using aluminum bathroom block.

Simultaneous processing of 24-well samples, temperature control accuracy of +/- 0.5 ℃, using digital temperature control mode, nitrogen consumption of 330ml/min/sample can be adjusted to achieve rapid oxygen-free condensing.

The 36-hole design can handle multiple samples simultaneously, with temperature control accuracy of +/- 0.5 ° C. Digital temperature control and adjustable nitrogen flow rate are used to achieve rapid oxygen-free condensation.