HTechMT SP310-XC rubbing paper Manual,OI

Related products

IPRE SR500 Roughometer OLED Digital Display
Rq、Rt、Rc、Rp、Rv、R3Z、R3y、Rz(JIS)、Ry、Rs、Rsk、Rku、Rmax、Rsm、Rmr、RPC、Rk、Rpk、Rvk、Mr1、Mr2Ra:0.025-12.5μmRa、Rq:0.005-16μm；Rz、Ry、Rt、Rp、Rv、Rmax、 R3z:0.02-160μm；RS、RSm:1mm；Rmr:0-100%(%Rt)；Rsk:0-100%

¥5680.0
SE
AMITTARI AR-131A + sand blasting shot peening Roughness Gauge Measurement range 0~750a
Digital display, LCD display0~750μm0.1μm|1μm

¥2550.0
SE
Roughness Gauge CY-200 Hypertherm surface roughness Detector
Blue backlight, 4-digit display, 10 mm LCDRa、RzRa：0.05~10.00μm/1.000~400.0uinch； Rz：0.020~100.0μm/0.780~4000uinch

¥5290.0
SE
IPRE SR600 anchor pattern instrument shot peening sand blasting Roughness Gauge 0~2000a large range
Surface Profiles and Pits0~2000Um (maximum adjustable to 6500um)±2um

¥1300.0
SE
KAIRDA NDT150A Surface Roughness Tester
Z-axis (vertical): 160μm; X-axis (horizontal): 17.5mm (0.69inch)0.002μm/±20μm；0.004μm/±40μm；0.008μm/±80μmRa、Rz==Ry(JIS)、Rq、Rt==Rmax、Rp、Rv、R3z、R3y、Rz(JIS)、Rs、Rsk、Rku、Rsm、Rmr、RPc、Rk、Rpk、Rvk、Mr1、Mr2

¥3780.0
SE
TQC DC9000 Hull Roughometer
205×80×40mm630g200×115×40mm

¥67586.0
SE
KAIRDA NDT151 Roughness Gauge asperity Measurement Instrument
Ra、Rz、Rq、Rt、Rmax、Rc、Rp、Rv、R3z、R3y、Rz(JIS)、Ry(JIS)Rs、Rsk、Rku、Rsm、Rmr、RPc、Rk、Rpk、Rvk、Mr1、Mr2Z-axis (vertical) 160μm (6300μin); X-axis (horizontal) 17.5mm (0.71inch)Z-axis (vertical) 0.001 μm/+/- 20 μm 0.002 μm/+/- 40 μm; 0.004 μm/+/- 80 μm 0.008 μm/+/- 160 μm

¥3780.0
SE
LANDTEK SRT-6200 Roughness Gauge 10μm stylus with built-in high-precision Sensors
digital displayRa、RzRa: 0.05 ~ 10.00μm / 1.000 ~ 400.0uinchRz: 0.020 ~ 100.0μm / 0.780 ~ 4000uinch

¥4320.0
SE
Surface Finish Meter KAIRDA NDT120 Surface Finish Meter is suitable for a variety of surface finish inspections
digital displayRa、Rz=Ry(JIS)、Rq、Rt=Rmax、Rp、Rv、R3z、R3y、RzJIS、Rs、Rsk、Rku、Rsm、RmrRa: 0.005µm ~ 16.00µm

SE
LEEB LBTQ423 surface roughness meter, contour asperity, original contour
17.5mm/0.7inchNot more than +/- 10%Not more than 6%

¥4000.0

Recommended for more manual