China

LEICI DDB-303A high-precision Conductivity Meter conductivity /TDS/temperature 1.0 class

SE
LEICI DDB-303A Conductivity Meter is a portable Conductivity Meter with an intrinsic error of +/- 1.0% FS for measurement, which can automatically convert Measurement frequency and manual temperature compensation.
$316.00/set
PromotionLoading...
Coupon
Model：
Contact
Details SPEC Con VIDEO CAT OI
Similar products

LeiCi DDB-303A Conductivity Meter (Basic Type)SPEC

LeiCi DDB-303A Conductivity Meter (Basic Type)Details

LeiCi DDB-303A Conductivity Meter (Basic Type)Packing list

SKU
NB001126
Instrument level
Level 1.0
Measurement parameters
Conductivity
Resolution
0.01μS/cm, automatically switch according to the range
Electronic unit reference error
± 1.0%F.S.
Power
Rechargeable lithium battery, power adapter (input: AC100~240V, output: DC5V)
size
80*225*35mm
Weight
0.4kg
DDB-303A
Conductivity Meter (Basic Type)
LEICI DDB-303A high-precision Conductivity Meter conductivity /TDS/temperature 1.0 class Picture

main feature

● High-definition LCD display, button operation

●Support functions such as automatic shutdown, power-off protection and factory reset

●Support IP65 protection level

● Standard configuration of conductivity electrode, electrode hanger, silicone protective cover, and wrist strap

 

Intelligent detection and automatic identification

● With stable reading mark and intelligent reminder

●Support manual temperature compensation

●Support direct input of cell constant

● Supports automatic frequency switching, and is equipped with a 1.0 constant electrode to cover the full range of measurements.

 

Power management

● Large-capacity lithium battery power supply, supports connection to PC and mobile power supply for charging

● With battery low Voltage reminder function and charging status reminder function

●Support backlight adjustment


FAQ
QCan the LEICI DDB-303A Conductivity Meter meet the HG/T2-1047 standard?
A Applicable, please consult the customer service of the mall for details about the HG/T2-1047 standard.
QConductivity detector does not support the electrode of 0.01, if the electrode constant is 1, it is a little big, does it have any effect on the measurement results?
A Hello, the instrument supports electrodes with a Conductivity detector constant of 0.01, but if the electrode constant is 1, it is not supported.
QIs there any stability introduction?
A DDB-303A Conductivity Meter stability value: (± 0.7% FS)/3h.
Knowledge
Standard
Filter Brand Store Contact