LEICI DDBJ-350 Conductivity Meter Class 1 Portable conductivity Tester

DDBJ-350

Conductivity Meter

Measurement parameters conductivity, TDS, salinity, temperature, instrument level 1.0 with backlit display, automatic temperature compensation, measurement conductivity, TDS, salinity and temperature

main feature

● Adopt high-definition LCD with clear display

● Temperature units are optional: ℃ and °F;

● Reference temperature 20℃ or 25℃ optional

●Supports functions such as power-on self-diagnosis, automatic shutdown, power-off protection and factory reset

● Support firmware upgrade function, allowing function expansion and personalized requirements

●Support IP65 protection level

● Comes standard with composite conductivity electrode, electrode hanger, silicone protective cover, wrist strap, portable suitcase, calibration solution

Intelligent detection and automatic identification

● Intelligent identification of end points, supporting automatic reading, scheduled reading, scheduled interval reading, and manual reading

●Support automatic/manual temperature compensation

● Automatically identify 4 kinds of GB conductivity standard solutions and support 1-3 point conductivity electrode calibration

●Supports multiple conductivity compensation methods such as non-compensation, linear, pure water compensation, etc.

● Supports automatic frequency switching, and is equipped with a 1.0 constant electrode that can cover the full range of measurements (it is recommended to use a 0.1 constant or 0.01 constant conductivity electrode for measurement of samples below 20 μS/cm)

Data management, information traceability

● Support data storage (500 sets each), review, deletion, transmission and printing

● Comply with GLP and realize data traceability

● Supports connection to a standard RS-232 serial port printer to directly print measurement results, with optional print formats

● With USB interface, it can be connected to PC through special communication software to realize data transmission.

Power management

● Large-capacity lithium battery power supply, supports connection to PC and mobile power supply for charging

● With battery low Voltage reminder function and charging status reminder function

●Support backlight adjustment

Packing list：Host x1, DJS-1CF type Conductivity detector electrode (platinum black) x1, T-818-B-6F type temperature electrode x1, electrode holder x1, AA alkaline battery (5 #) x4, TP-16 type serial printer connection x1, RS-232 communication connection x1, REX data collection software x1, manual x1, certificate x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.