List Magnetik MEGA-CHEK Pocket FN platings Thickness Gauge

MEGA-CHEK Pocket FN

Coated platings Thickness Gauge

The MEGA-CHEK coating Thickness Gauge uses a high-precision digital measurement probe in which the analog signal in the probe can be digitized and transmitted directly to the host computer. This technique avoids interference and maximizes the accuracy of repeated measurements. The high-precision probe is connected to the main machine through a special cable, and the probe with different functions only needs to be replaced, without changing the cable, which is extremely cost-effective.

The operation is very simple, one-click operation.

Equipped with ASR technology (automatic statistics function)

1. Instrument selection:

MEGA-CHEK Pocket FE Type: Equipped with a ISO2178-compliant magnetic induction probe. It is applied to the measurement of the thickness of all non-magnetic coatings on steel, such as paints, plastics, enamels, chromium, zinc, etc.

MEGA-CHEK Pocket FN Model: Equipped with a combination of magnetic induction and eddy current probes for ISO2178 and ISO2360. It is used to measure the thickness of all insulating coatings on non-ferrous metals (aluminum, zinc, copper, etc.), such as anodized films, paints, coatings, etc. It is also used to measure the thickness of all non-magnetic coatings on steel, such as paints, plastics, enamels, chromium, zinc, etc.

2. Instrument parameters 

Packing list：Host X1, PFN-52D probe X1, probe line X1, Fe-based and non-Fe-based Calibration plate X1, calibration shim X2, Encasement box X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.