BANTE A130-UK Laboratory pH Meter Acid alkalinity Detector

SKU: NB014763

PH range: -2.000~20.000pH

PH measurement Accuracy: ±0.002pH

resolution: 0.01/0.001pH/optional

Temperature Measurement range: 0~100℃/32~212℉

Power: DC12V power adapter

Dimensions: 240*200*80mm

Weight: 1.7kg

PH calibrated: 1 to 5 point

Calibrating fluid: USA, NIST, DIN, custom

mV range: -2000~2000mV

mV measurement Accuracy: ±0.2mV

mV resolution: 0.1mV

ORP calibrated point: 1 point (only for R.mV mode)

ORP measurement mode: Relative or absolute mV

Temperature Measurement range: 0~105℃/32~221℉

Temperature measurement Accuracy: ±0.5℃

temperature resolution: 0.1℃

Temperature calibrating point: 1 point

Temperature unit: ℃, ° F, optional

data lock: Manual or automatic end point locking

Data stability condition: Standard or high precision

Calibrated reminder: 1 to 31 days or closed

Interval reading: 10, 30, 60 seconds, 10, 30 minutes or off

One-click reset function: contain

data storage: 1000 groups

Communication interface: USB

Connector: BNC

Display: 7-Inch TFT LCD

Optional accessories: P11 type pH electrode, P11-LiCl type pH electrode, P11-HA type pH electrode, P11-NA type pH electrode

Optional accessories: P12 type pH electrode, P13 type pH electrode, P15 type pH electrode, P16 type pH electrode, P18 type pH electrode, P19 type pH electrode, P21 type pH electrode, P22 type pH electrode

Optional accessories: TP-10K temperature probe, 501 type ORP electrode, 502 type ORP electrode, pH standard buffer reagent (USA standard), pH standard buffer reagent (NIST standard)

Packaging Dimensions: 300*240*170mm

Encasement Weight: 2kg

Ion Measurement range: 0~30000Ppm, mg/L, mol/L (please refer to the ion electrode description for the actual range)

Ion measurement Accuracy: ± 0.5% F. S (primary ion), ± 1% F. S (secondary ion)

Ion display resolution: 0.001, 0.01, 0.1, 1

Ion calibrated point: 2 to 5 point

Ion measurement mode: Direct reading method, known addition method, known reduction method, sample addition method, sample reduction method

Hardness Measurement range: 0.05~200mmol/L

Hardness measurement Accuracy: ±1% F.S

Water Hardness Display Resolution: 0.001, 0.01, 0.1, 1

Hardness calibrated point: 2 to 5 point

Water Hardness Measurement Units: ° dH, ° e, ° fH, mg / L, mmol / L

Temperature compensation method: Automatic/Manual

A130-UK

Laboratory pH Meter

Optional 5 ion Measuring methods, 1000 sets of data storage, system menu contains 20 optional parameters, Measurement accuracy: 0.002pH.

A130 Professional LABOratory pH/Ion Meter

Professional laboratory pH Ion Meter, optional 5 ion measurement methods, 1000 sets of data storage, system menu contains 20 optional parameters, measurement accuracy: 0.002pH.

pH mode features:

• Professional laboratory pH Ion Meter with 7-inch TFT display.

• Optional pH buffer standard (USA/NIST/DIN) or 5-point custom calibration.

• Automatic electrode diagnosis, with electrode slope and offset display.

• Automatic temperature compensation to ensure accurate measurement over the full range.

• Solution Temperature Coefficient (STC), compensates for pure water measurements and converts readings to 25°C.

• Alarm limit, automatically warns if the measured value exceeds the set range.

pH Ion Meter

ORP mode features:

• 1-point offset calibration, allowing adjustment of displayed values to known standards.

• Relative and absolute mV modes provide accurate ORP readings.

Ion mode features:

• Optional ion measurement methods, including direct reading method, known addition method, known subtraction method, sample addition method and sample subtraction method.

• Optional concentration units, including ppm, mg/L, mol/L, mmol/L.

• 2 to 5-point key calibration, including 8 optional concentration calibration points.

• Automatic identification of ion-selective electrodes without specifying ion types.

• Electrode management can store the slope of 3 ion electrodes and recall the calibration data of each electrode.

• Calibration report provides calibration standards and electrode slope details.

pH Ion Meter

Water hardness mode features:

• 2 to 5 point key calibration from low to high concentration.

• Optional water hardness units, including German degrees, British degrees, French degrees, mmol/L and mg/L.

General features:

• Calibration due reminder to remind users to calibrate the meter regularly.

• Automatic end point locking, retaining stable measurement values for easy viewing and recording.

• Interval reading mode, regularly send measured values to PC or printer.

• Password protection to prevent unauthorized calibration and settings.

• Expanded memory can store up to 1000 sets of data.

• USB communication interface is easy to connect external devices.

• One key reset (Reset) automatically restores the instrument to the factory default settings.

Packing list：Host X1, P11 pH electrode (made in the UK) X1, TP-10K temperature probe X1, pH standard buffer reagent (pH4.01/7.00/10.01) X1, DC12V power adapter X1, manual X1, certificate X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.