BANTE A150-DL Laboratory conductivity /TDS/salinity/resistivity meter

A150-DL

Laboratory conductivity /TDS/salinity/resistivity meter

Simultaneous detection of conductivity, TDS, salinity, resistivity values, Measurement range 0.05µS/cm~ 20mS/cm, automatic temperature compensation, with calibrated reminder and password protection function.

A150 LABOratory Conductivity/TDS/Salinity/Resistivity/Conductivity Ash Meter

Professional laboratory conductivity meter, including 5 measurement functions, 1000 sets of data storage, the meter is suitable for measuring liquid conductivity, total dissolved solids (TDS), salinity, resistivity and conductivity ash value, measurement accuracy: 0.5 %FS.

Features

• Professional laboratory conductivity meter with 7-inch TFT display.

• 1 to 5 point key calibration, automatic identification of conductivity standard solution.

• Selectable cell constants to match connected conductivity electrodes and recall calibration data for each sensor.

• Optional linear temperature compensation coefficient, pure water compensation coefficient, normalized temperature and TDS conversion factor.

LABOratory Conductivity Meter

• Automatic temperature compensation to ensure accurate measurement over the full range.

• Alarm limit, automatically warns if the measured value exceeds the set range.

• Calibration due reminder to remind users to calibrate the meter regularly.

• Automatic end point locking, retaining stable measurement values for easy viewing and recording.

• Interval reading mode, regularly send measured values to PC or printer.

• Password protection to prevent unauthorized calibration and settings.

• Expanded memory can store up to 1000 sets of data.

• USB communication interface is easy to connect external devices.

• One key reset (Reset) automatically restores the instrument to the factory default settings.

Packing list：Host X1, Conductivity detector standard solution (84 µS/cm, 1413 µS/cm, 12.88mS/cm) X1, CON-0.1 Conductivity detector electrode X1, CON-1 Conductivity detector electrode X1, TP-10K temperature probe X1, DC12V power adapter X1, Conductivity detector standard solution (84 µS/cm, 1413 µS/cm, 12.88mS/cm) X1, manual X1, certificate X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.