German Knicks QNix1500 dual-use Thickness Gauge, iron-based/non-iron-based 0~2mm/5mm

QNix 1500

Coating Thickness Gauge

Introduction

The QNix1200 and QNix1500 models are all-in-one and only need to be zeroed and calibrated, making them very easy to use. Among them, QNix1200 is a magnetic Thickness Gauge, which can be used to measure the coating and plating on magnetic substrates such as steel and iron; The QNix1500 is a magnetic and eddy current Thickness Gauge, which can be used to measure not only magnetic substrates such as steel, but also coatings, oxide films, phosphate films and other cladding on the surface of non-magnetic metals such as aluminum, copper and stainless steel. These two models are simple to operate, easy to carry, high precision, and the probe and body are designed at a 90° right angle, which can meet the measurement of some narrow spaces (such as the inner wall of the pipe), and are loved by the majority of users.

Benefits:

Simple and easy to use

• All-in-one design, only need to be zeroed, no calibration required

• High-low limit indication signs

• Factory calibrated and ready to use out of the pack

Accurate readings

• Measurement accuracy±1%

• Dual-probe dual-purpose

• Measurement of coatings and plating on magnetic substrates such as steel and iron

• Comply with a number of national and national standards

Reliable measurements

• The probe is designed at a 90° right angle to the body

• It can meet the measurement of some small spaces (such as the inner wall of pipes).

• Provide a full set of traceable inspection certificates

sturdy

• Sealed, durable, and impact-resistant

• Instrument and probe construction is durable

• Suitable for use in harsh environments

effective

• Automatic power on/off

• The right-angle design of the probe is convenient for measuring tight spaces such as the inner wall of the tube

Product display diagram

Packing list：machine X1, manual X1, certificate X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.