JFL QLP paint levelling scratch Tester
SEJFL QLP coating levelling scratch Tester is designed and manufactured according to ASTM and D2801 standards. The QLP coating levelling scratch Tester is generally used in conjunction with the Sag Tester to test the levelling (dispersion) and sag properties of the coating during construction and drying. In order to achieve the required surface effect, a comparative test is carried out.
$173.00/piece
PromotionLoading...
Coupon
Model：
QLP
Similar products
JFL QLP Paint levelling coating scratch TesterSPEC
JFL QLP Paint levelling coating scratch TesterDetails
JFL QLP Paint levelling coating scratch TesterPacking list
- SKU
- NB018969
- groove depth
- 0.1/0.2/0.3/0.5/1.0mm；0.25/0.5/1.0/2.0/4.0mm
QLP
Paint levelling coating scratch Tester
Introduction
According to ASTM and D2801 standards, the QLP type paint leveling coating scraping Tester designed and manufactured is generally used in conjunction with the sagging Tester to test the leveling (dispersion) and sagging of the coating during construction and drying, and to achieve the required surface effect for comparative testing. Because it is a special test, it saves time, and can quickly test whether the product is qualified or not, so as to quickly adjust the formula.
FAQ
QHow is this Levelling Applicator used and how to judge the result? Does the breakpoint represent the parallel band part levelling?
A
Observe the distance between each pair of films and select the minimum spacing (that is, when two stripes are found and there is a gap in the middle with a looming interval). The film thickness is levelling data (thickness and spacing)
QIs there a levelling measurement of powder coatings?
QIs this paint levelling scratcher ASTMD 4062-99 compliant?
A
This paint levelling scratch tester is suitable for ASTMD 4062-99. Please consult customer service for detailed application definition.
Standard