QTZ film cone bending test YONGLIDA film coating cracking performance test

QTZ paint film cone bending test in line with GB/T11185 and ISO6860 standards, QTZ Bending Tester shaft length of 203mm, suitable for paints, Coating and other industries.

$229.00/set

PromotionLoading...

Coupon

Model：

Certificate

YongLiDa

Manufacturer authorization

Contact

Details SPEC Con CAT

YongLiDa QTZ Conical Mandrel Bending TesterSPEC

YongLiDa QTZ Conical Mandrel Bending TesterDetails

YongLiDa QTZ Conical Mandrel Bending TesterPacking list

SKU: NB002775

Tapered shaft size: F3.2 ~ 38mm

Overall Dimensions: 300*120*83mm

Standards: GB/T11185-89、ISO6860-84

Cone shaft length: 203mm

QTZ

Conical Mandrel Bending Tester

QTZ film cone bending test YONGLIDA film coating cracking performance test Picture

Introduction of QTZ paint film conical bending Tester

Yonglida QTZ paint film conical bending Tester is used to evaluate the performance of the paint film coating against cracking or peeling off from the metal plate when it is bent around a conical shaft under standard conditions. The QTZ paint film conical bending Tester complies with GB / T11185- 89. According to the requirements of ISO6860-84 standard, the diameter of the large end of the tapered shaft is 38mm, and the diameter of the small end is 3.2mm.

QTZ paint film conical bending Tester display

Yonglida QTZ paint film conical bending Tester display

FAQ

QDoes this device have a specific test material size?

A Ordinary test grade tinplate can be used, NBchao is on sale. The size is about 70 * 150mm, and the Film thickness does not exceed 0.8mm.

QCan the film Conical Mandrel Bending Tester be applied to ASTMD522?

A OK

Knowledge

Standard

Filter Brand Store Contact