United States

RDS 6 #3/8 "+ KHC.21 Mayer Rods + Drawdown Plate

SE
Spreader Film thickness of 13.7 microns, suitable for different industries to do film experiments, Mayer Rods supporting the use of Drawdown Plate can effectively improve the film effect.
Certificate
Contact
Details SPEC VIDEO CAT OI
Similar products

RDS 6# 3/8"+KHC.21 Applicator rod setSPEC

RDS 6# 3/8"+KHC.21 Applicator rod setDetails

RDS 6# 3/8"+KHC.21 Applicator rod setPacking list

SKU
NB028951
WFT
13.7μm
Production process
wire-wound
diameter
9.52mm
Total length
400mm
application width
300mm
Grip Width
50+50mm
material
stainless steel
Wire diameter
0.15mm
Drawdown Plate Model
KHC.21
Coating table size
24*34cm
Baseplate size
430*247*12mm
material
rigid polyester board + foam layer + rubber cushion
packing size
476*260*83mm
Net Weight
2.08kg
6# 3/8"+KHC.21
Applicator rod set
Spreader Film thickness of 13.7 microns, suitable for different industries to do film experiments, Mayer Rods supporting the use of Drawdown Plate can effectively improve the film effect.
RDS 6 #3/8 "+ KHC.21 Mayer Rods + Drawdown Plate Picture
RDS 6# 3/8"+KHC.21 Coating Stick Set Details Figure 1RDS 6# 3/8"+KHC.21 Coating Stick Set Details Figure 2RDS 6# 3/8"+KHC.21 Coating Stick Set Details Figure 3

The RDS6# 3/8"+KHC.21 coating rod set consists of an RDS6 wire bar applicator and a rk stamping bed.

The RDS6 wire rod coater is a coating rod with a wet film thickness of 13.7 microns, and the length of the RDS wire rod coater is 40mm. At present, the forming wire rod coater has only 6.35mm diameter, while the winding type has three diameters: 9.5mm, 6.35mm and 12.7mm, and the more widely used is 9.35mm diameter.

RKThe embossing table consists of a clip, a rigid polyester sheet, and a layer of foam/rubber upholstery. Compared to proofing directly on a hard substrate, proofing on an RK imprint machine has better repeatability and proofing results. This is due to the fact that the soft foam/rubber liner can absorb the pressure applied by the operator to a certain extent, so as to make the proofing effect better.

RDS 6# 3/8"+KHC.21 Coating Stick Set Details Figure 4

RDS 6# 3/8"+KHC.21 Coating Stick Set Details Figure 5

RDS 6# 3/8"+KHC.21 Coating Stick Set Details Figure 6

RDS 6# 3/8"+KHC.21 Coating Stick Set Details Figure 7

RDS 6# 3/8"+KHC.21 Coating Stick Set Details Figure 8RDS 6# 3/8"+KHC.21 Coating Stick Set Details Figure 9RDS 6# 3/8"+KHC.21 Coating Stick Set Detail Figure 10

RDS 6# 3/8"+KHC.21 Coating Stick Set Details Figure 11

RDS 6# 3/8"+KHC.21 Coating Stick Set Details Figure 12

RDS 6# 3/8"+KHC.21 Coating Stick Set Details Figure 13

RDS 6# 3/8"+KHC.21 Coating Stick Set Details Figure 14

RDS 6# 3/8"+KHC.21 Coating Stick Set Details Figure 15

RDS 6# 3/8"+KHC.21 Coating Stick Set Details Figure 16

Illustration of the RK imprint bed

RDS 6# 3/8"+KHC.21 Coating Stick Set Details Figure 17


RDS 6# 3/8"+KHC.21 Coating Stick Set Details Figure 18


RDS 6# 3/8"+KHC.21 Coating Stick Set Details Figure 19


Optional

RDS 6# 3/8"+KHC.21 Coating Stick Set Details Figure 20

RDS 6# 3/8"+KHC.21 Coating Stick Set Details Figure 21

RDS 6# 3/8"+KHC.21 Coating Stick Set Details Figure 22RDS 6# 3/8"+KHC.21 Coating Stick Set Details Figure 23

Note: Click on the accessory image to view the product details.

FAQ
QDo you support customization? Such as wet film thickness and length?
A Spreader rod length and main rod diameter support customization, but wet film thickness RDS has provided dozens of specifications covering more than 200 microns, and in principle does not accept customization.
Knowledge
Standard