RDS 7 #3/8 "+ KHC.21 Spreader + Drawdown Plate Set

7# 3/8"+KHC.21

Applicator rod set

7 #Spreader rod Film thickness is 16.0μm, Spreader width is 300mm, diameter 9.52mm, Total length 400mm, used for Optical inspection film, film, battery and other films.

The RDS 7# 3/8"+KHC.21 Coating Stick + Stamping Table Kit consists of an RDS7# applicator wand and an embossing bed.

The RDS #7 wire Bar Coater is made of a steel rod by winding steel wire or using extrusion process, used to coat 16 micron precision film thickness coating rod, in the coating, ink industry using RDS wire rod coater to prepare a lot of samples, its ultra-high wet film scale accuracy and high-quality wire rod by the industry users favor, as the original imported products from the United States, and 80 years of experience in the industry, so that it is produced and developedThe RDS#7 line rod applicator is superior in terms of craftsmanship and quality.

RKThe embossing table consists of a clip, a rigid polyester sheet, and a layer of foam/rubber upholstery. Compared to proofing directly on a hard substrate, proofing on an RK imprint machine has better repeatability and proofing results. This is due to the fact that the soft foam/rubber liner can absorb the pressure applied by the operator to a certain extent, so as to make the proofing effect better.

Illustration of the RK imprint bed

Optional

Note: Click on the accessory image to view the product details.

Packing list：Stainless Steel Rod X1 Transparent Encasement Hose X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.