KairDa NDT110B Pocket surface roughness Tester brochure

Related products

KAIRDA N05/90 Ultrasonic Thickness Gauge Probe
1.2~230.0mm5F10mm

SE
KAIRDA N05 Ultrasonic Thickness Gauge Probe
probe

SE
KAIRDA F1 standard probe magnetic Induction NDT530 Coating Thickness Gauge optional probe
magnetic induction0 ~ 1250µm±3%

¥660.0
SE
Roughometer extension rod KAIRDA KS55
Extension rodExtension Sensors

SE
Roughness Gauge Probes (Sensors) KAIRDA KS110 Curved Probe
curved probeCylindrical curved surfaces with a measurement radius greater than 3mm

SE
Roughness Gauge Probes (Sensors) KAIRDA KS131 Deep Groove Probe
Deep groove probeIt can measure grooves with a groove width of more than 3mm and a groove depth of less than 10mm; or the surface Roughness of steps with a height of less than 10mm, and can also measure planes and cylinders.

SE
Roughness Gauge Probes (Sensors) KAIRDA KS120 Small Hole Probe
Small hole probeRoughness of the inner surface of the hole with an aperture greater than 2mm can be measured, the maximum depth is 9mm, and the plane and cylinder can also be measured

SE
Leeb Hardness Tester Impact device (probe) KAIRDA type C measurement small thin parts and surface hardening layer
2.7mJ3.0g1600HV

SE
KAIRDA NDT130 Portable Color Screen Roughness Gauge Roughometer
Z-axis (vertical) 160μm, X-axis (horizontal) 17.5mm (0.69inch)Z-axis (vertical): 0.002μm/+/- 20μm, 0.004μm/+/- 40μm, 0.008μm/+/- 80μm2,4 inch IPS/320X240 dot matrix

¥4000.0
SE
KAIRDA N02 Ultrasonic Thickness Gauge Probe for measurement of coarse crystal materials such as cast iron
3.0~300mm2F12mm

SE

Recommended for more brochure