TianDiXingHuo XH-M(20mm) Adhesion Tester brochure

Related products

TIANDIXINGHUO XH-CH01 Integrated floor Thickness Gauge concrete Thickness Gauge 10~850mm
10~850mm10~350mm：±1mm；351~600mm：±2mm；601~850mm：±3mm950 components * 1000 measuring points

¥7420.0
SE
TIANDIXINGHUO XH-30T Bolt Tension Gauge, hydraulic cylinder, hollow self-resetting 300kN
55Mpa12mm5kg

¥4730.0
SE
TIANDIXINGHUO XH-80TS intelligent bolt drawing instrument, anchor force pull meter 800kN
65MPa15mm14kg

¥8880.0
SE
TIANDIXINGHUO XH-M Adhesion Tester Pull Method/Pull Method 10mm
manual0~10KN0~127.38MPa

¥8640.0
SE
XINGHUO ZTT-920 Reflective film Anti-Impact performance Tester
450±3g250mm

¥3150.0
SE
XINGHUO ZTT-910A Reflective film anti-stick paper disbonding performance Tester
6600g±33gLength (150 +/- 10) mm, Width (63 +/- 5) mm, Height (80 +/- 5) mmLength (150 +/- 10) mm, Width (25 +/- 5) mm, Height (20 +/- 5) mm

¥2780.0
SE
XINGHUO ZTT-920A reflective film bending performance Tester
300*200mm3.20±0.05mm220±5mm

¥2300.0
SE
XINGHUO ZTT-950 pavement marking line Thickness Gauge
0~12mm0.01/0.001mmGB/T 16311-2009

¥1320.0
SE
XINGHUO ZTT-301 digital reflection marking Measurement Instrument
1.05º88.76 ° (complementary angle is 1.24 °)Silicon diode + V (λ) comparator

¥10470.0
SE
XINGHUO ZTT-930M protruding road sign abrasion performance Tester
It can be composed of solid-walled plastic pipes with smooth inner walls of not less than 150mm in inner longitude, with a length of 2850mm, and the non-verticality of the sand guide pipe is not greater than 0.2 °.The upper mouth size of the correction funnel is 120mm × 40mm, the height is 100mm, and the 4-sided slope angle is 45 °.Standard mesh with a mesh size greater than 850 μm.

¥4370.0
SE

Recommended for more brochure