RDS 16 #3/8 "Double wire-wound Applicator rod 36.6μm wet film thickness Wear resistant stainless steel

16# 3/8"

Double wide-wound Applicator rod

Wet film thickness 36.6 microns, Wire diameter 0.41mm, wide shallow groove design to promote high viscosity paint flow, reduce clogging, high durability.

RDS15# double-wound wire coater prepares wet film with a thickness of 36.6 microns, a rod diameter of 9.5mm, and wear-resistant stainless steel, with an effective coating width of 300mm and a Wire diameter of 0.41mm.

United StatesRDS is a more than 80 years of technical experience in the development and production of coated rods, RDS wire rod coaters are favored by many users in CHINA, with good materials, up to 0.1 micron coating film accuracy advantages to become a well-known brand of coating rods in the industry.

RDS provides a variety of experimental wire rods with different process specifications to meet the needs of experimental coating films in a variety of industries. Cords are availableWound, formed (grooved), double-wound and open bar up to 12 feet in length. 3 different diameters of stainless steel rods, more than 70 sizes of stainless steel wires. Customization is accepted.

Double-wound wire rods reduce clogging and eliminate stitches for higher viscosity coatings. The grooves created by wrapping smaller lines around a larger tip (see picture) are wide and shallow, allowing heavy paint to flow better. The smaller tip line creates a smaller break in the paint flow so that the paint can be saturated more completely. Although double spooled wire bars are more expensive than open wire bars, they are also more durable.

Optional

Packing list：Stainless Steel Rod X1 Transparent Encasement Hose X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.