China

LEICI DZB-715 Portable in situ STIP-scan

LEICI DZB-715 Portable in situ STIP-scan instrument grade pH: 0.1; conductivity: 1.0; dissolved oxygen: +/- 0.30mg/L, Measurement parameters pH, ORP, conductivity, salinity, dissolved oxygen (film laminating type), temperature, depth.
Model:

LeiCi DZB-715 STIP-scanSPEC

LeiCi DZB-715 STIP-scanDetails

LeiCi DZB-715 STIP-scanPacking list

SKU
NB030282
Instrument level
pH: 0.1 grade; conductivity: 1.0 grade
Measurement parameter
pH, ORP, conductivity, dissolved oxygen, temperature, depth
pH range
(0.00~14.00)pH
Minimum resolution
0.01pH
Electronic unit error of indication
±0.10pH
ORP range
(-1999.9-1999.9)mV
Minimum resolution
0.1mV
Electronic unit error of indication
±20.0mV
Conductivity range
0μS/cm~200mS/cm
Minimum resolution
0.001μS/cm
Electronic unit error of indication
±1.00%FS
Dissolved oxygen range
(0.00~19.99)mg/L
Minimum resolution
0.01mg/L
Electronic unit error of indication
Dissolved oxygen concentration : +/- 0.30 mg/L; dissolved oxygen saturation : +/- 1 0.0%
Temperature range
(-5.0~70.0)℃
Minimum resolution
0.1℃
Electronic unit error of indication
±0.5℃
depth range
(0.00~10.00)m
Minimum resolution
0.01m
Electronic unit error of indication
±0.05m
Size (mm), Weight (kg)
90×235×56,0.3
DZB-715
STIP-scan
LEICI DZB-715 Portable in situ STIP-scan Picture

DZB-715 portable in-situ water quality monitor, composed of handheld control terminal, cable, measuring terminal, intelligent electrode, etc., using intelligent multi-parameter digital sensor, can obtain accurate location and depth information of the detection point, can be put into the river, lake reservoir and river assessment section of the sea to carry out in-situ monitoring of pH, conductance, dissolved oxygen, ORP, water temperature, water depth, applicable water depth up to 10 meters, to avoid water quality changes in the process of sampling and transmission. The whole set of instruments can be traced from the detection point, instrument calibration, detection and storage, and uploading.

Ray Magnetic DZB-715 Water Quality Tester Details Figure 1

Ray Magnetic DZB-715 Water Quality Detector Details Figure 2

Ray Magnetic DZB-715 Water Quality Tester Details Figure 3

Ray Magnetic DZB-715 Water Quality Detector Details Figure 4

Ray Magnetic DZB-715 Water Quality Tester Details Figure 5

Ray Magnetic DZB-715 Water Quality Tester Details Figure 6

Ray Magnetic DZB-715 Water Quality Tester Details Figure 7

Ray Magnetic DZB-715 Water Quality Detector Details Figure 8

Ray Magnetic DZB-715 Water Quality Tester Details Figure 9

Ray Magnetic DZB-715 Water Quality Tester Details Figure 10

Ray Magnetic DZB-715 Water Quality Tester Details Figure 11

Ray Magnetic DZB-715 Water Quality Tester Details Figure 12

Features

●Measurable parameters include pH, ORP, conductivity, salinity, dissolved oxygen, temperature, depth, pressure;

●Equipped with multi-parameter digital sensor and patented deep-water stirring electrode, and different digital electrodes such as PH, conductivity, and ORP can be selected according to needs;

●Using the new microprocessor technology, customized 3.5-inch TFT touch screen, up to 65k color gamut, translucent material, suitable for field use;

●Single-point measurement or continuous measurement with automatic stabilization function;

●Support single-point or multi-point calibration;

●Support measurement section ID management, GPRS function and automatic data upload function, and can also set a variety of reference conditions to check the experimental results;

●Support GLP specification, large-capacity memory storage (5000 groups), can realize direct transmission of in-situ data to the management platform;

● Global Positioning System (GPS) (optional), which can store measurement data and station coordinates;

●Support electrode correction function, firmware upgrade function and portable instrument power consumption management function, etc.;

●The cable length is standard 10m, and the longest is 100m (need to be customized);

●With USB, RS485 interface, connected with PC, charging power supply, can also be managed and analyzed by software;

● The software can be upgraded by PC;

●Long-life rechargeable lithium battery power supply host;

●IP67 waterproof at the measuring end, IP65 for the handheld terminal;

●Portable test box design, complete accessories, easy to carry to the site for measurement. Distributed capacitive touch pen for easy use with gloves in the field.


FAQ
QIs the price listed on the website the final cost for overseas purchases?
ANo, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
QWhat is the specific process for purchasing the product?
AFirst, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
QWhat should I do if the instrument I purchase needs repair?
AAfter-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
Knowledge
Standard