CHINA ASR-8516 Drop Tester

ASR-8516

Drop Tester

Introduction

Single-arm Drop Tester This machine is specially used to test the damage of product packaging by falling, and to evaluate the impact resistance strength during transportation and handling. Applicable standards: ISO2248 JISZ0202-87 GB/T4857.5-92

Machine Features

The single-arm drop test machine can perform free drop test on the surface, corner and edge of the package. It is equipped with a digital display height indicator and a decoder for height tracking, so that the product drop height can be accurately given, which is consistent with the preset drop height. The error is not more than 2% or 10MM. This machine adopts a single-arm double-column structure, with electric reset, electric control drop and electric lifting device, easy to use; the unique buffer device greatly improves the service life, stability and safety of the machine. Single arm setup for easy product placement.

Environmental requirements for the machine studio

Temperature: 5°C～+28°C[1] (average temperature within 24 hours ≤28°C)

Relative Humidity: ≤85%RH

Power supply conditions Three-phase four-wire + protective ground wire,

Voltage range: AC (380±38) V 

Packing list：Host X1, manual X1, warranty card X1, certificate X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.