TQC SP3000 Adhesion Tester Cross-cut Guide Gauge/Baige Plate 6-in-1 Multifunctional Adhesion Tester

SP3000

Adhesion Tester

6 teeth/11 teeth, knife tooth spacing 1mm, 1.5mm, 2mm, 3mm, instrument material stainless steel, application standard ISO 2409:2003, ASTM D3359

SP3000 is a multifunctional adhesion cross-hatch test instrument. Through this small 100×55mm stainless steel cross-hatch plate (also called a guide gauge), you can not only measure adhesion according to ISO 2409:2003, ASTM D3359, card type The SP3000 adhesion cross-hatch test plate also comes with a 50-160 micron wet Film Thickness Gauge with a scale of 10 microns, and a 0-180 micron wet Film Applicator. In addition, the SP3000 adhesion cross-hatch test plate also comes with three The graded leveling detection scale facilitates detection of viscosity indicators, and the four corners of the panel also provide rounded corner detection functions. All in all, SP3000 is a very cost-effective and powerful adhesion testing instrument among cross-hatch boards at home and abroad.

Introduction

The SP3000 card-type adhesion Tester is mostly used for cutting adhesion testing with a cut gap of 1-(1.5)-2-3 mm. It is tested in accordance with ISO 2409:2003 and ASTM D3359 cross-method to measure the wet film thickness of 50-160 microns and check. Adjust the edge of coverage, film thickness 0-180 microns and provide indication of paint viscosity. Knives and tape are included in delivery.

Specifications

Product details

Take you into the Dutch TQC

【Extended reading】

• "Dutch TQC SP3000 Adhesion Tester Operating Instructions"

• "Appreciation of the beautiful unboxing pictures of SP3000 adhesion grating board"
  

Packing list：Adhesion instrument x1, tape x1, manual x1, tool x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.