China

LD-BL-A 90 ° Peel strength Tester

LD-BL-A90 ° Peel strength Tester specializes in tensile testing of plastics, non-woven fabrics, leather, cloth zippers and other products. LD-BL-A90 ° Peel strength Tester capacity 0-30KG, Accuracy grade 0.5, maximum load 30KG, effective force measurement range 0.02/100 -100%, test force resolution maximum load 250,000 yards.
Model：
Certificate
Contact
Details SPEC
Similar products

JingHuaYiQi LD-BL-A 90 ° Peel strength TesterSPEC

JingHuaYiQi LD-BL-A 90 ° Peel strength TesterDetails

JingHuaYiQi LD-BL-A 90 ° Peel strength TesterPacking list

SKU
NB033265
Capacity selection
0~30KG
Accuracy grade
Level 0.5
Maximum load
30KG
Measurement range
0.02/100-100%
Test force resolution
Maximum load 250,000 code; inside and outside are not divided, and the whole resolution remains unchanged
Effective test width
100mm
Efficient stretching of space
650mm
Test speed range
0.01~500mm/min
Speed Accuracy
±0.5%
Measurement Accuracy
+/- 0.5% of the indication
Acquisition sensing method
High-Precision Sensors
Control system
Stepper motor and stepper drive control
Test bench lifting device
Computer digital control/manual jog control
Safety protection device
Software automatic diagnosis, electronic limit
re-test
Manual can return to the initial position of the test at the highest speed, and automatic can return automatically after the test is over
Fixture configuration
Customized according to user product sample requirements
motor
400W
Weight
About 55kg
LD-BL-A
90 ° Peel strength Tester
LD-BL-A 90 ° Peel strength Tester Picture

Introduction

The 90° peel Strength Tester is specially used for plastic, non-woven fabrics, leather, cloth zippers and other products for tensile testing, tensile Strength Testers, equipped with different fixtures for coatings, plastic films, composite films, flexible packaging materials, adhesives, adhesive tapes, self-adhesives, rubber, paper, and other products for tensile testing, tensile strength and elongation, tensile strength and elongation, tensile strength and elongation, right-angle tear, heat sealing strength, tear strength, 180 ° peel strength (including T-type), 90 ° peel, puncture resistance test and other items.

Meets standards

GB/T2792 Test standard for peel force of adhesive tape, ASTM D3330,

Test Method:

1. Fold the free end of the specimen in half 90 degrees and peel it off from the breadboard with an adhesive surface of 25mm. Clamp the free end of the specimen and the test plate on the upper and lower grippers. The peel surface should be aligned with the testing machine line. The testing machine peels continuously at a peeling speed of 300mm/min±10mm, and there is an automatic Recorder to draw the peeling curve (GB/T2792-1998 adhesive tape peeling force test standard).

2. Test results: calculated according to the distance between 20-80mm after peeling.

3. Within the range of peeling duty, read a number every 20mm, and at least 4 numbers should be read. Find its average.

FAQ
QCan this JINGHUAYIQI 90 ° Peel strength tester correspond to ASTMD6252/D6252M?
A Yes, please refer to the NBchao standards page for specific standards.
Standard